Search results

  1. tungsten

    2010 Yukon XL Lowering drivers seat.

    Had a quick look,about a 1 inch drop would start hitting the floor.Theres a hump right about in the middle that would interfere. Removing carpet and insulation probably would help. A bar right in the front like a handle would have be cut off. Havent been driving the unit much,it was purchased...
  2. tungsten

    2010 Yukon XL Lowering drivers seat.

    I’ve only looked under to see if maybe something was in the way. Assuming 4 bolts and a bunch of wires to unplug?
  3. tungsten

    2010 Yukon XL Lowering drivers seat.

    Perhaps I should store 400 lbs on the seat for a week. Lol. Should sag the foam a little.
  4. tungsten

    2010 Yukon XL Lowering drivers seat.

    Ya that’s what I thought. Wondering if turning the seat down manually may gain some space? Probably not I assume theirs stops to prevent it going to far.
  5. tungsten

    2010 Yukon XL Lowering drivers seat.

    Well with the sunroof option my head is about one inch away. From the frame. I’m 6’6” Seat goes down just fine. Any info related to the question?
  6. tungsten

    2010 Yukon XL Lowering drivers seat.

    SLT leather power seat,Is there any way of getting this seat lower? Tall guy I find it doesnt go down enough. Previous owner was a small guy so seat is still pretty firm.Wondering if an interior shop could remove foam or some how make it lower. Thanks
  7. tungsten

    Cleaning engine bay 2010 6.0

    Did a search in engines and drive train got nothing? Gotta be something some where ? What can get wet and what cant? Other than the obvious like alternator throttle body etc. Thanks.
  8. tungsten

    2010 2500 Yukon XL 6.0l

    Awesome, was able to tighten the bolt a little more noise is gone yay. I bought this unit with this leak for a good discount, pretty happy that I was able to fix. Onto other fixes.
  9. tungsten

    2010 2500 Yukon XL 6.0l

    So I guess no clamp is made to push at the bolt between 5 and 7,threads are there.I may try to fab something up.
  10. tungsten

    2010 2500 Yukon XL 6.0l

    How much are you guys tightening these clamps? Do you do it when its hot? Cheers,
  11. tungsten

    2010 yukon xl rear door

    Thanks guys,manual hatch looking at the hinges theirs a stop built in its only about 1/16th away from hitting at current height.
  12. tungsten

    2010 yukon xl rear door

    Is it possible to put longer stays on to get the door to go higher when open? Tall guy keep hitting the door.
  13. tungsten

    2010 2500 Yukon XL 6.0l

    So through some reading and I got it done,90% fixed. Both rear bolts are broken on drivers side,seams theirs room for a 5th bracket at cylinder 5-7? I see two threaded holes in the head?
  14. tungsten

    2010 2500 Yukon XL 6.0l

    Rear exhaust driver’s side. Bolts broken and leaks. Have the clamps. But need help with getting that dam bolt out that holds the ground strap. Guessing front drive shaft needs to go to get access. Appears it’s a 16mm bolt. Assuming I’ll have to use the open end wrench because of the ground...
View older results

Forum statistics

Threads
138,101
Posts
1,999,130
Members
103,029
Latest member
brice715

Latest posts

Back
Top