Search results

  1. Rocket Man

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Did you remove the seat from the vehicle like you’re supposed to?
  2. Rocket Man

    Help with brakes before I pull my hair out

    I did not know that, thanks. Bookmarked.
  3. Rocket Man

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Looks like somebody put a bolt in backwards. What would happen if you turned it around so the threaded portion is sticking out?
  4. Rocket Man

    Vibration at highway speeds....did I put my driveshaft back up wrong?

    You should definitely replace the u-joint clamps with new if you didn’t mark them. They conform to the exact shape of the u-joints when first installed and should never be put in different locations.I failed to do that once and had one break. I got lucky and wasn’t going too fast (although WOT...
  5. Rocket Man

    New compressor and bags...easier with suspension hanging free?

    I just did the rear shocks and compressor on my 08 on different days. For the shocks I let the suspension hang and then put a jack under each side of the axle as I did each shock so there was no tension on them and the bolts could slide out easy. Pull the inner fender liners for better access to...
  6. Rocket Man

    Help with brakes before I pull my hair out

    You can have access to the service manual with a subscription to alldatadiy. You won’t find a diagram for the board anywhere, it’s proprietary GM.
  7. Rocket Man

    New throttle body - Limp Mode

    There is a known issue with the TB wires right where they connect to the TB. The wires inside the plastic jacket can break and although they look fine on a visual inspection the copper wiring inside can have a break. You should replace the pigtail and solder the wires together and use heat...
  8. Rocket Man

    Tonyrodz's Tahoe Build Thread

    Has she been sitting for awhile like mine, Tony?
  9. Rocket Man

    My From Start to Finish 6.0L Build

    Thank you sir. :)
  10. Rocket Man

    Rocket Man's 02 Denali Build Thread AKA "THE BEAST"

    I can still hope I guess. :p Hope it’s not the trans.
  11. Rocket Man

    My From Start to Finish 6.0L Build

    Well I’m doing good but still in the middle of the fight. Just finished 4 rounds of chemo and starting chemo/radiation next month. Fighting to save my bladder; they wanted to take it but I persuaded them not to, at least not yet. I feel like I’m beating it, time will tell. :)
  12. Rocket Man

    Rocket Man's 02 Denali Build Thread AKA "THE BEAST"

    I understand. (Edited)
  13. Rocket Man

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    You do realize it’s the journey, not the destination? :p
  14. Rocket Man

    Rear Side Window Flag Decal

    Search “2008 Yukon flag decal” on Amazon. They’re there. :cool:
  15. Rocket Man

    What are the differences between these two ACDELCO shocks?

    All you have to do is look at those two different shocks to see they aren’t interchangeable. The top one is the correct type of mounting, however I do not know if it’s the exact right shock for your truck. Try Rock auto and they will ask for your RPO code which is found inside your glovebox or...
  16. Rocket Man

    Loose rear sway bar link

    Sway bars stop a sway but not a wobble. Otherwise they’re be called anti wobble bars instead of anti sway bars. :favorites37:
  17. Rocket Man

    Liftgate height - how tall should it be

    I did not know that. I did find a link from GMC on how to do it. https://www.gmc.com/support/vehicle/storage-doors-windows/hands-free-power-liftgate
  18. Rocket Man

    Rocket Man's 02 Denali Build Thread AKA "THE BEAST"

    Hey @NickTransmissions I was wondering if you could shed some light on my issue. Something broke in my drivetrain and I haven’t been able to get under it and we what the issue is due to health and weather. I’m trying to see if my Performabuilt Level 3 4l60e is the culprit by hooking up my Tech2...
  19. Rocket Man

    Liftgate height - how tall should it be

    Depends on if you’re lowered or stock height. Also you could disconnect the shocks and see if it goes higher but be careful and don’t drop it on your head or you’ll be mad at me. :( It’s possible someone replaced them with some that are too short and aren’t allowing full opening because they’’re...
  20. Rocket Man

    Engine fan question

    You didn’t mention if the defrost was on. Even in the mixed mode, if the control is set to partial defrost the AC compressor comes on; the system uses it to dry the air out. If the compressor comes on the fans come on. Even in winter mine comes on because the control is always set to defrost or...
  21. Rocket Man

    2004 6.0 NV4500 Tahoe

    Good to hear. We’ve all been there. I was away for quite awhile myself.
  22. Rocket Man

    '02 Loose Shifter

    I mean, they come with the red Loctite on them from the factory for some reason. I also had to heat mine when removing it but like @adventurenali92 I didn’t use any when reinstalling it and it hasn’t loosened up.
  23. Rocket Man

    2004 6.0 NV4500 Tahoe

    Or got blowed away in a hurricane. Both him and @randeez have been gone since about the same time, both five in Flarda. Hope they're both OK.
  24. Rocket Man

    07 yukon denali fuel pump control module

    Yeah I don’t see a fuel pump drive module for the 2007, only the 2008 and up according to Rock Auto. Also note that if you do have one, a replacement will need to be programmed with a bi-directional scan tool like a Tech2.
  25. Rocket Man

    2004 6.0 NV4500 Tahoe

    Wonder where @Dantheman1540 went? He hasn’t been on here since last November.

Forum statistics

Threads
138,037
Posts
1,997,584
Members
102,974
Latest member
kikeap

Latest posts

Back
Top