These are the ones I have...
https://a.co/d/02ribqLP
I bought them "used" from Amazon resale back in 2022 for like $190 after tax.
I would shop around until you find a deal, lots of options out there.
I forgot to post these pics of my home made "Kelderman" air tank/compressors mounting...
Dual Viair 485C compressors and approximately 6 gallon tank. Built the brackets to hold it all and mounted the compressors on like 1/2" thick rubber isolators. They are stupid quite.
3 water traps. 1 on...
My current ride height before air ride was 4/6 dropped.
2" Belltech drop spindles up front.
At this point if it aired out any further it would lay the wheel well onto the tire. It is really close right now and you probably wouldn't have much turning radius, BUT at least in the event of...
Well, one step closer to having full air ride....
This is with the modified '21 and up Escalade/AT4 air struts installed in the front controlled by an Airlift Performance 3P system which I can control from the touchscreen Tesla style radio in the Burb. It should be a really neat setup when...
The windshield designed for the rain sensor will have a open spot in the dot matrix area behind the rear view mirror and plastic clips for the sensor to lock into.
When you get the windshield replaced tell them your truck has the rain sensor. They should reinstall the sensor with a new gel pad...
My opinion... it is a feature the truck came with so it may as well work.
I think it works fairly well 99% of the time.
Once in a while they will activate when a drop of water rolls across the sensor while driving and the windshield isn't really wet enough to need wiping. An example is after a...
Thanks. I didn't really do a write up, just posted about them in my build thread...
https://www.tahoeyukonforum.com/threads/kbuskills-2008-burb-ltz-mod-thread.100141/post-2014228
The small light mounted down by the fog light is the cornering light.
That wasn't my first choice of location but...
Wow, cool but seems like a lot to possibly go wrong, especially with aftermarket (Chinesium) retrofit parts.
They were called cornering lights and I liked them so much I made my own and installed them on the Burb.
Here is a quick video in case you haven't seen them...
This is probably one of...
That's interesting for sure. Trying to figure out how it works. From the pics it looks like it just pivots in the center (obviously) but what controls the pivoting? Just the weight shifting? Seems like that would be very dependent on how level everything was installed and also how level the road...
Look up GM lean on the ol' Google machine, you will find tons of info.
Very common for these trucks to sit lower on the driver's side.
You didn't specify front or rear but I assume both.
The fuel tank is on the driver's frame rail and there is always a driver in the driver's seat whenever the...
Just a heads up, the 2500s will ride like an old covered wagon without some weight in the rear.
So if you don't do a lot of towing or you don't tow heavy then a 1500 is probably going to be more comfortable.
With that being said, if you do tow heavy or alot a 2500 is really hard to beat as...
When I got these they were already removed from the Escalade they came off of. I installed a short piece of 1/4" DOT air line with a shrader valve for testing purposes so I could air them up off of a normal compressor, like filling a tire.
These have like a safety/check valve built into them so...
My '08 Burb has been 4/6 dropped for a while and I retained the Auto Leveling but bypassed the Autoride.
I guess it depends on if you are married to the Autoride portion of the system as to how much trouble it will be.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.