-
-
YYukonLover replied to the thread Looking at buying this 2004.Not really. Those videos were taken at a temp of about 50-53 degree and full sun. Low for night was prob 33-36 degrees. I've heard of...
-
-
YYukonLover replied to the thread Looking at buying this 2004.Several others have said they WOT at 70, and idle 55/60... but I've never seen or heard anyone hit 80 and it stays until they lift. That...
-
YYukonLover replied to the thread Looking at buying this 2004.Sorry. I fixed the permissions on the video. One of them will show you the PSI gauge registers at a pretty high 80PSI and holds. I have...
-
YHey guys, found a relatively clean and affordable 2004 XL. Its a few hours away from me. Its got a 5.3L and about 240K. The idle RPM...
-
YYukonLover replied to the thread 2001 change oil light.Is it a problem? Is it causing false readings as well? What do you think of the 2004havinf thr 900rpm idle ans 55psi of oil pressure at...
-
YYukonLover replied to the thread 2001 change oil light.I'm looking at buying those relatively clean 04 yukon xl with 239k on her. UT the idle rpm seems high. Around 800-950 and thr idle warm...
-
-
YYukonLover replied to the thread Interchange parts.I guess I'm getting at that I have a 2003 SLT, 4x4. It's been wrecked but has lots I'd good parts on it. And I'm trying to part it out...
-
YYukonLover replied to the thread 2001 change oil light.If the oil psi is considered low to most of us, but decently above gm specs of 6psi for every 1k rpm... oil is fresh and full without...
-
-
YHey guys, I've searched a few forums, and not git a direct answer. I'm wondering what parts can be swapped specifically between...
-
YHey guys We all know I've been struggling with bouncing oil pressure lately. The dash gage has still been 20 -25 idle and 25-30 under...
-
YYukonLover replied to the thread OIL PSI / BRAND / WEIGHT.It reads like I solve calculus... and I can't do that. lol
-
YYukonLover replied to the thread OIL PSI / BRAND / WEIGHT.Did the 2001 XL have an oil cooler? I know my 2003 does
-
YYukonLover replied to the thread OIL PSI / BRAND / WEIGHT.Thank you for the ideas. I was not aware of the lack of calibration. Although it is not expressly printed on the dash, I assumed GM...
-
YHi everyone, I know oil pressure seems like a common question. But, what I don't understand is the constant variations; especially when...
-
YHey guys On my 01 XL I was installing the new brakes. I took off the old rotor, I seen a lot of brake material and dust in the hat near...
-
-
Loading…
-
Loading…
