Good point. Proven fact is take all combustion vehicles off the road and it reduces pollution by about 6 to 8 percent. The source is from agriculture. Before we didn't have this large a problem. With other countries that didnt produce as much meat and world overpopulation it's clear.
Sent from...
I had my knock sensors replaced last year. So while they were at it got a kit of gaskets for 140 dollars that replaces all the intake manifold ones. I had quite a few that were shot. I would suggest you replace all those as well. It was worth it in mine had lean codes coming up. Now all good...
Sorry that was a knock sensor I was explaining. Bad news my trans needs a rebuild but they guy uses the valvetrain kit I bought. Seems the trans uses one band for 2nd and 4th gear. He verified that it is only using 1st and 3rd which are on another band.
Sent from my LM-V600 using Tapatalk
I don't have any error codes on my 04 yukon denali and yet it won't shift from first unless I let off the throttle. So I bought a transgo kit and talked to a shop today and he said I don't have a second gear because he was shifting manually. I have tested my tps but seems fine.
But yet others...
I have an 04 yukon denali and I cannot shift properly WOT. But if I let off the throttle it will shift fine. I was suggested to buy a transgo kit to fix this problem.
I went to a shop today and a tech did a test drive and said it is shifting from 1st to 3rd you don't have a second gear.
Yet...
I have a 2004 gmc yukon denali xl with a 4l65e. It is very similar. I have about the same problem if I let off the throttle it shifts fine. So I ordered a transgo kit to fix the problem.
Today I went to a trans shop and they had a guy from the shop test drive with me. He said you don't have a...
Well a shop I went to today has doubts. He said I don't have a second gear. All we know is if shifted manually it seems to shift from 1st to 3rd gear.
Any ideas? And yet another person on the yukon forum had my symptoms and it fixed the problem.
Sent from my LM-V600 using Tapatalk
Hi I bought a transgo kit for my 04 Gmc yukon xl. It delays shifts. If you let off the throttle it will shift. It doesn't make noises but seems to downshift fine but delays the shift. I did see someone on here try this kit for the symptoms I have and it worked.
I went to a transmission shop...
I never had a scan tool. Just had found a post on the forum about grounds and all my locks and windows work without a problem. Best is to use a dremel tool to clean the grounds but if all you have is sandpaper that will do. Never had a problem since. I would lose power to mirrors or locks then...
I would still check the grounds under the driver's door first might save you some money. It's right on the body just need a screwdriver and clean those first.
Sent from my LM-V600 using Tapatalk
Since it's both mirrors most likely the ground contacts under the driver's door. Just in one raised rail. Clean both contacts. Mine were rusted and that happened to me as well as losing power to door locks. Hasn't done it since.
Sent from my LM-V600 using Tapatalk
Just need some wrenches and sandpaper or a dremel like I used. My cd changer never worked but lost power to the stereo and the mirrors would lose power intermittently. Just clean the 2 grounds under the driver's door. That should help. Mine were rusted bad. Soon as I did that power all the time...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.