Recent content by Sikbrah

  1. Sikbrah

    Steering column

    Id still try and relubricate the steering shaft before spending money in a steering column the easiest and free way to find out ---------- Post added at 07:15 AM ---------- Previous post was at 07:12 AM ---------- https://m.youtube.com/watch?v=BFi6asV2K_A Here's the video on YouTube I did this...
  2. Sikbrah

    A/C question......plz help or give some input

    Problem fixed! Tensioner was FUUUUUUUUUUUUCKED
  3. Sikbrah

    A/C question......plz help or give some input

    Gotcha! Ok so I'll check the side of the belt I'm just trying to fix this myself but it just pops off while driving I let the ac go for a out 15 mins in my driveway and it was good so I figured the tensioner or the pulley is messed up cause as soon as the belt popped off it made a buzzing noise...
  4. Sikbrah

    A/C question......plz help or give some input

    I said I just got the motor replaced not I replaced the motor. But anyways if my ac unit is on a separate belt and not on the serpentine belt the 4 bolts that hold it in place doesn't give it room to be misaligned am I wrong?
  5. Sikbrah

    A/C question......plz help or give some input

    Well I'll take a look but I didn't do the motor swap I took to a shop all I know is when they pulled the motor out they unbolted the ac unit from the motor first and the. Yanked the motor so I'll have to bring that up to him
  6. Sikbrah

    A/C question......plz help or give some input

    Ok and if it is misaligned how do I re-aligne it?
  7. Sikbrah

    Steering column

    I don't know if you see it but that's the steering shaft. You see the rubber boot on the bottoms and a bolt in the center and a rubber boot up too? Take the bolt out make sure someone is holding the steering wheel inside the car and once you take it off let the bottom steering shaft rest down...
  8. Sikbrah

    Steering column

    Is it a clunking noise? And does happen when you turn or go over bumps?
  9. Sikbrah

    A/C question......plz help or give some input

    I have a 03' suburban 1500 2wd I just got the motor replaced and put new serp belt and ac belt well now the ac belt pops off. Could this be an alignment issue or a tensioner issue? It happens with the new belt and the old belt can't seem to figure it out.
  10. Sikbrah

    Dash board peeling problem

    I tried bit she kept coming back :shrug:
  11. Sikbrah

    Dash board peeling problem

    Anyone else have a dash board peeling? is there a way to fix that or color match it? or do you have to replace the whole dash? it bugs the hell out of me and everytime my wifes foot goes on it i slap her leg! also anyone know the part number for the "ooh shit" handle on the passanger dash?
  12. Sikbrah

    Problem with right turn signal

    i figured it out the light socket for the towing lights had a bent pin touching another pin and i think it was shorting it out i bent it straight and now the right turn signal works again! PROBLEM SOLVED!!!!
  13. Sikbrah

    Problem with right turn signal

    Sometimes the right turn signal works other times it flashes a few times then doesn't do it again I have to put it back to the middle then do it again and sometimes it works once then I gotta keep going back and forth. Anyone else have any issues? Think it's time for a new signal switch?
  14. Sikbrah

    New from California

    Not at all that's in my work region too.
  15. Sikbrah

    Steering column clunking noise....

    Must say manthe intermediate shaft never made me happier did what the video said and boom it stopped! Thanks man
See more

Forum statistics

Threads
137,720
Posts
1,990,392
Members
102,711
Latest member
johnsonwillie199

Latest posts

Back
Top