Recent content by Rev_Night

  1. R

    2-Channel Dash Cam Install

    All good. I'm new to electrical work. And your suggestion was spot on actually. I removed the lower kick panels, found a red 10mm bolt, put the ground on that, and now it works perfectly. turns out it was user error all long (lame) THANK YOU
  2. R

    2-Channel Dash Cam Install

    christ im beginning to think i have a defective product somewhere. I'll email Blackvue and ask for a new power fuse tap cable. Camera still doesn't power on when I turn car on. All fuses and fuse taps are flush. The crimp between fuse taps and power cable is strong. What could possibly still be...
  3. R

    2-Channel Dash Cam Install

    Sounds good. Its raining today and my tahoe can't fit in my single car garage. I will post tomorrow
  4. R

    2-Channel Dash Cam Install

    hmmm I connected everything correctly (i think?) but the camera is not turning on. I know the camera is still good because it works when I use the cig lighter power cable. Both fuse taps appear to be inserted flush and fit perfectly. F26 -Accessory -Micro 3 -Pre-existing 10a in row closest to...
  5. R

    2-Channel Dash Cam Install

    Yeah, one row and another row. It doesn't say if the rows matter re: old or new fuse
  6. R

    2-Channel Dash Cam Install

    What instructions are you referring to? When I got my Micro3 fuses in, the "instructions" just said to plug it in ha. Written in English but barely
  7. R

    2-Channel Dash Cam Install

    Gotcha. Does it matter which slot the 10 and the 5 are in?
  8. R

    2-Channel Dash Cam Install

    But that would mean I have a 10a and a 5a in the same fuse tap, right? The existing car fuses are 10a, the new ones im getting are 5a. So a 5a and a 10a would be in the same fuse tap. I don't know anything about electrical work. Is this correct? Wouldnt 2 separate amperages lead to an issue?
  9. R

    2-Channel Dash Cam Install

    perfect! so 2 fuse taps means four 5a fuses to go in them
  10. R

    2-Channel Dash Cam Install

    Sounds good. I noticed the difference between your link and the one I posted is that mine has ridges on the left and right sides, while yours doesn't. There was another post here about someone shaving it with util. knife, I would prefer not to go down that route. I'll just order new ones...
  11. R

    2-Channel Dash Cam Install

    ok sweet. so i can use that fuse using the orientation in the picture then, since only the middle prong is used for power. That being said, its pretty hard to fit this in. Do I just need to use more force? https://www.amazon.com/dp/B0CJCD2FG2?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1
  12. R

    2-Channel Dash Cam Install

    What so how does that apply here? What is the feed in this situation and what is the correct orientation?
  13. R

    2-Channel Dash Cam Install

    Meaning? Remember: I'm an idiot
  14. R

    2-Channel Dash Cam Install

    ha probably So I finally have time to work on this project. I am attempting to fit a Micro3 fuse to F26 and I am running into the same issue as the OP did -- it won't fit maybe. I freely admit I'm a noob when it comes to electrical work. Does the orientation of the fuse matter? Due to its...
  15. R

    2-Channel Dash Cam Install

    SEO in this context is Search Engine Optimization: 25 Search Engine Optimization (SEO)/UPFITTER 26 USB/Search Engine Optimization (SEO) Retained Accessory Power (RAP)
See more

Forum statistics

Threads
138,042
Posts
1,997,737
Members
102,981
Latest member
Towmaster

Latest posts

Back
Top