mikez71's latest activity
-
mikez71 reacted to Tyrant's post in the thread SOLVED - Big 3 upgrade, EVERY warning light on immediately after. with
Like.
You're not wrong, technically, but had they wired the bus in parallel, you could unplug any module without tanking the entire system... -
Good info and thanks for posting it. I’ve got Launch but am not super happy with it. I’ll have to check out TopDon.
-
I've gone through several scan tools. I have owned, and currently own, TopDon, Launch, Autel, and Innova scan tools. I've settled on...
-
mikez71 replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.Nope, just white... Oh that's what a few on ebay have, couple of little dot indicators? Thanks Jimmyy!!
-
mikez71 replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.Yea, but where the contact is should be wiped clear? I know we don't want conductive grease spread over the contacts? I was going to...
-
mikez71 replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.Cleaned my dimmer switch contacts with rubbing alchohol and eraser. Slathered a little dielectric grease on them. (Hopefully it doesn't...
-
mikez71 replied to the thread GM Front Axle Nut?.For my '05 2500 suburban, charm.li shows: 177 ft.lbs. for the "hub nut" 184 ft.lbs. for the "axle nut" The front axle nut on my 2500...
-
I just happened to buy a socket set for a 2000 K3500 I'm parting out and need to take the front suspension and was curious, so looked up...
-
I re use them also but add lock tite to the threads when I install them. Zero concern they are fine as long as they don’t come loose...
-
I always reuse them
-
Thank you. After reading some threads on spacer installs, I tried a long piece of pipe placed under the bottom spring coil and over...
-
mikez71 replied to the thread Tahoe 2007 starts rough and smells like gasoline.That would also be my guess..
-
mikez71 reacted to DJPoertsch's post in the thread Tahoe 2007 starts rough and smells like gasoline with Like.
Good morning dear friends from the forum. I wanted to talk to you about whether my assumption was correct. My Tahoe 2007 with currently...
-
mikez71 replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.Found out my Motive pressure bleeder no longer works. Won't pressurize, pressure bypasses at the pump handle. I used it one time! Will...
-
-
mikez71 replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.Replaced my front rotors and pads with bosch parts. Old pads were thin and had some cracks. I was planning to do the wheel bearings...
-
