-
-
Iirarb01 replied to the thread misfiring on driver side cylinders.i tightened my intake found one loose still didn’t change noticed black soot on my tail pipe and w sulfur smell from my exhaust some...
-
Iirarb01 replied to the thread misfiring on driver side cylinders.hey yall quick update grounds seem ok only thing i have found is my short term fuel bank is through the roof looking at it with a scan...
-
Iirarb01 replied to the thread misfiring on driver side cylinders.where is the ground located?? i’ll check it today
-
Iirarb01 replied to the thread misfiring on driver side cylinders.so one thing i noticed is if i let the car warm up it will stop missing if it’s cold it will miss slightly at idle and will miss heavy...
-
Iirarb01 replied to the thread misfiring on driver side cylinders.which ground cable is that ?? and i haven’t swapped the injectors but i can give thet a shot tomorrow
-
Ihey everyone so i got my engine swapped in my 04 tahoe it’s a 5.3 was running great for a couple weeks then all of a sudden im getting...
-
Ihello i got a question im looking to see if i can get a remote start and key fob for my 2004 yukon sle when i got it came with a single...
-
Iirarb01 replied to the thread how much oil pressure is to much oil pressure.so there a possibility i have a 80 psi sender and not a 60 psi sender ?
-
Iso i just swapped my 2004 gmc yukon with a engine out of a 03 tahoe. runs greats only thing i noticed is its got crazy high oil...
-
Iirarb01 replied to the thread 2004 yukon security light staying on.thank you for your help i found the main ground for the engine wasn’t tight enough which was causing my issue. tightened it up and...
-
Iirarb01 replied to the thread 2004 yukon security light staying on.so i found the ground that goes to the back of the motor up top was moved to a bolt for the coil pack. also is that the ground strap...
-
Iirarb01 replied to the thread 2004 yukon security light staying on.i used my existing ecm. i also tried running my scan tool and it would not read the vin either
-
Ihey everyone so this is my first post so please if i’m in the wrong spot tell me. but i’m in need some of help i have a 2004 yukon sle...
-
-
Loading…
-
Loading…
