Recent content by CDONNS

  1. C

    Recommendations on roof rack cross bars

    I went the Amazon route and have had no complaints, the bars, attachment and innards are all metal and work great. $199 all in
  2. C

    GMC 2021 Yukon SD Card and Receptacle Replacement - $1400 an hour in labor?

    You probably didn't even need to replace the receptacle and saved another $30, probably just a corrupted SD. Some of these repairs are highway robbery when it comes to the simple stuff and like it was said above, throw a crazy price at people and see if they take it.
  3. C

    Front Fender turn signals replacement

    Thanks for the info, like the window tint, I'll roll the dice for a fix it ticket if someone decides to pull me over. Honestly, the white LEDs on the aftermarket one make me MORE noticeable for other vehicles.
  4. C

    New Member - New 2023 Tahoe Sterling Gray.....Escalade V Wheels

    What color is your Yukon? I would like to see the images when you get a chance!
  5. C

    Front Fender turn signals replacement

    I swapped them out for smoke with white LED, adds a nice touch. The driver side had a few LEDs go out after a few weeks but had a replacement sent to me. The swap is a direct plug and play, took about 10 min.
  6. C

    Added Charging module to Constrained 2023 Ultimate

    I wonder if anyone makes an upgraded module for this. The stock one, which I assume this is, just doesn't perform well in my opinion. I recently installed the Boost Auto one for the arm rest pocket and it is leagues better in terms of charge speed.
  7. C

    2022 Yukon Denali Blackout Option

    Looks great for the cost, are you going to do the side trim and fender badges too?
  8. C

    Remove Front License Plate Bracket - 2023 Yukon?

    All of my previous vehicles that had plate brackets installed I replaced with color matching bumper plugs for the holes. Unless you plan to spend a lot and have body work done to fill the holes, that is your best bet. The holes are already there if they are riveted in.
  9. C

    New Here / First Thread / First Mods (Yukon XL Denali)

    Welcome! I received my Diesel Denali XL in October. So far I have added all Husky X-act Contour floor mats including cargo, I prefer them so much more than weathertech (less "plastic-y"). I also used my GMC points to swap out the puddle lights to the GMC ones and did the side marker LED...
  10. C

    Adding usb to sliding console

    I'm planning to install the same thing, just waiting for a Black Friday coupon code. Seems like they do them frequently enough
  11. C

    KCMO Area - Ceramic on new YXL Denali Ultimate

    I did 20% non-ceramic all around (minus windshield). Personally it hits my preference spot on, I do the same to all of my vehicles over the past 20 years and haven't had any issues with "fix-it tickets". The rears will always be darker since they come factory tinted, usually to about 20%. Mine...
  12. C

    mirror power cord adapter for dashcam?

    Here is the Mirror connector pinout for Yukons on the 2022, should be the same for the 21 and 23. Pin 2 (Violet) should be your ignition wire at 12V and pin 5 (Black) should be your ground. You would need to step down the 12V from the vehicle to 5V 1A (dashcams are basically glorified webcams)...
  13. C

    KCMO Area - Ceramic on new YXL Denali Ultimate

    435 and Metcalf, KS side.
  14. C

    KCMO Area - Ceramic on new YXL Denali Ultimate

    Who have you contacted so far? For all things aftermarket automotive I would say KC Trends is a good starting point, but I expect they will be a bit higher in cost given their clientele. As a fellow KC'er (OP more specifically) keep the thread updated with what path you go forward with. As an...
  15. C

    Those with 2023 orders and updates.

    Seems like the chat advisors are hell bent on not providing event codes anymore. They seem to be regurgitating the same thing the bot provides along with an explanation that providing codes doesn't provide value to the customer and can cause confusion. Regardless, my order was produced on 9/13...
See more

Forum statistics

Threads
129,242
Posts
1,812,708
Members
92,344
Latest member
SDHanz

Latest posts

Top