builds4christ's latest activity

  • builds4christ
    builds4christ reacted to dkad260's post in the thread Running lean with Like Like.
    What is your vacuum at idle, using a physical gauge, also is the needle steady? Have you done a leakdown test of the injectors...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Haha Haha.
    Ha! Since it didn't oceangate on you... you may have dished pistons now!
  • builds4christ
    builds4christ replied to the thread Running lean.
    Haha no worries, I almost imploded my engine with vacuum lol!
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    Oops, the way I kept imagining it, there was no clean air supply side. I'm a moron, don't listen to me..
  • builds4christ
    builds4christ replied to the thread Running lean.
    Thanks all. I'll check out all your stuff. I removed the check valve from the breather (clean) side. Definitely ran better and stopped...
  • builds4christ
    builds4christ reacted to donjetman's post in the thread Running lean with Like Like.
    https://motionraceworks.com/collections/catch-can-pcv makes catch cans for boosted applications.
  • builds4christ
    builds4christ reacted to Hobert's post in the thread Running lean with Like Like.
    I watched this video for the explanation of a 2 can 2 check valve system. I am not boosted but installed the full system anyway. 2...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    Stock only pulls from one side, and you need to vent from somewhere.. My thoughts regarding two check valves.. what you're considering...
  • builds4christ
    builds4christ replied to the thread EVAP Charcoal Canister Removal Modification.
    I'm kinda thinking of deleting as well. I can tune the purge solenoid out, but where should I disconnect the hoses and let it vent? I'm...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Yeah I agree. I think maybe the pcv system is screwed up man. When it was setup stock, the port on top of the intake was attached to...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    That is odd that it's running so differently from when you got it? I suspect the vacuum is normal, but maybe because you're sucking on...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Alright, got some stuff to report. Drove it today and it ran badly. A couple things to note. There was surging for one and LTFT were...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    And I'm not saying it won't run well. Should run the same under boost as when you re-routed the PCV to blower inlet.. (blowby might...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Hmmmm. Dang it. Well, let's see. The stuff should be coming tomorrow morning. I'll report back.
  • builds4christ
    builds4christ replied to the thread Running lean.
    I think we're on to something. So during the time it was initially screwing up the LTFT, both were PCV's going into the inlet of the...
Show older items

Forum statistics

Threads
137,746
Posts
1,991,134
Members
102,735
Latest member
Jumpshot12

Latest posts

Back
Top