What Stall for 03 Tahoe

[tahoe035.3]

I've been thinking lately about putting a stall in my Tahoe it's a 2003 with a 5.3 and I was wondering what everyone would recommend. It's my daily driver it has all the normal bolt ons, long tubes, corvette servo, cold air intake, black bear tune and came with 3:73 gears and I also have 20x12 wheels and 33" tires idk if I'd have to buy a stinger stall for bigger wheels and tires. So What would be a good stall for a daily with a stock trans besides a vette servo that I could live with everyday. I was think like a 3200 stall but idk which Stall to buy and who to buy it from

 

[bottomline2000]

not sure a bigger stall would help without a cam upgrade. gears may more beneficial in your case.

 

[RED TAHOE LS]

I have to agree with bottomline2000, especially with 33" tires. Good luck,
David g............

 

[01ssreda4]

not sure a bigger stall would help without a cam upgrade. gears may more beneficial in your case.

Nah I dont agree with that. I went with a Circle D 3200 2A and have been super pleased. That plus longtubes and a tune and this big ole girl moves the **** out.

http://www.circledspecialties.com/p-6-gm-278mm-hp-4l60-ls-torque-converter.aspx

See here:

 

[tahoe035.3]

Nah I dont agree with that. I went with a Circle D 3200 2A and have been super pleased. That plus longtubes and a tune and this big ole girl moves the **** out.

http://www.circledspecialties.com/p-6-gm-278mm-hp-4l60-ls-torque-converter.aspx

See here:

That's pretty impressive! Definitely makes me want one more now

 

[bottomline2000]

Nah I dont agree with that. I went with a Circle D 3200 2A and have been super pleased. That plus longtubes and a tune and this big ole girl moves the **** out.

http://www.circledspecialties.com/p-6-gm-278mm-hp-4l60-ls-torque-converter.aspx

See here:

Yeah I don't doubt you can get the jump with the stall, but add in 33" tires and it's a different story. What size tires u running?




Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[01ssreda4]

Yeah I don't doubt you can get the jump with the stall, but add in 33" tires and it's a different story. What size tires u running?




Sent from my SAMSUNG-SM-T377A using Tapatalk

I believe they are around 30.5.

 

[bottomline2000]

I believe they are around 30.5.

Yeah that's a big difference in tire height from a 33 on 20x12 rims. I just went from a 285 50 20 to a 295 35 24 and it's about an inch difference in tire height and I noticed a need to change my gearing because of a dead spot in O/D. I run a cammed stalled 6ltr btw so I'm not short on power. OP can try the stall but I have a feeling he will want gears afterwards.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[01ssreda4]

Yeah and I just ordered a set of Motive 4.30s for mine yesterday. Not so much for acceleration (it really doesnt need it) but for pulling the camaro and other stuff. I have a heavy foot and like to GO when I hit the pedal, even loaded. It flies unloaded but throw the car behind it and freeway on ramp accels take longer then i care for.

 

[bottomline2000]

Please post up results. Just realized you were the one with the camaro. I'm considering 4.10s. 4.30 doest like much of a difference so I'm curious how the work out for ya.

Sent from my SAMSUNG-SM-G900A using Tapatalk