Still led's behind rims

[angel.arteaga]

Watsup guys

So i am looking for ideas on how to go about putting led's behind the rims and NOT have them spin with the rim.

My idea is to somehow find a way to build a "ring" out of aluminum or some other type of thin metal and find a way to weld it into something behind the rim that does not spin with the rim and then Zip tie the LED strips to that ring.

Ok so make it rain guys give me you all's feedback, ideas, likes, and dislikes about this.

 

[Gzes]

I've seen the behind the wheel lights on eBay. They are like $60 I think. I saw them when I got my neons

 

[Splatmaster527]

Just weld/bolt/duck tape/jerry rig a ring to the Brake Caliper Mount and run the wires along the brake line...

Should be pretty easy with some flexible LED strips such as these

 

[ezdaar]

Just weld/bolt/duck tape/jerry rig a ring to the Brake Caliper Mount and run the wires along the brake line...

Should be pretty easy with some flexible LED strips such as these

yess and they will melt within days...

 

[Splatmaster527]

yess and they will melt within days...

Depending on how close to the brake rotor you put it...

If you made the ring from aluminum and spaced it a few inches from the rotors I dont think it would be an issue at all. There should be plenty of space in the 20in wheels

 

[mrtrill]

ummm....dont do it for $1000 Alex!!!

 

[streetscraper1]

I think it looks silly, but to each his own! As long as you like it!