Rubbing with a Belltech 2/4 drop 24" rims

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

timjohnson22

Full Access Member
Joined
May 15, 2010
Posts
375
Reaction score
10
Location
GEORGIA
Well I got my Yukon lowered this last week with the Belltech 2/4. I noticed rubbing when I am turning, going over bumps I also hear it in the rear. So I am going back to the shop that installed it and they are going to reshape my inner wheel trim on all 4. This is going to cost me $80. I will take pictures post them let you know if I have any rubbing at all after the reshape. Tires 305/35/24
 
Last edited:

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
107
Trimming the liners to fit fours is pretty easy, it requires next to no trimming.
Could have done it on your own with some snips in 20 minutes tops.
Don't let them overtrim (most likely they will) because its only rubbing on the two liner buldges in the rear wheel well (one is on the rear inner part of the rear tire, while the other is towars the front).
Then it is also rubbing on the rear part of the front wheel liner that is infront of the running boards.
May be rubbing th front portion of the liner if your offset is not high, but with Asanti's I bet it is.
 
OP
OP
timjohnson22

timjohnson22

Full Access Member
Joined
May 15, 2010
Posts
375
Reaction score
10
Location
GEORGIA
Ok, I just picked up my Yukon from the Shop. They heated up the inner trim and pushed it back all the way and let it harden. I can go over a bump over 10 MPH and no rubbing, I can back up and no rubbing. I also had my right front bumper repainted, it had a large scratch on it. Now it looks new. For all of the work that I got done I only paid $170.


Scratch Before:

DSCF5027.jpg


After Scrattch:

DSC_0246.jpg

Belltech 2/4 Drop:

DSC_0258.jpg



Tell me what you think of the MOTHERSHIP!!!

THANKS!!!

DSCF5027.jpg DSC_0246.jpg DSC_0258.jpg DSC_0247.jpg DSC_0248.jpg
 
Last edited:

THE YETI

Director of Operations
Supporting Member
Joined
Apr 29, 2009
Posts
25,511
Reaction score
10,107
Location
South FL
looks awesome! we had the same issues with our 2/3 on 24s. We went from a 305/35 to a 295/35 tire and have zero issues now. Ride is the exact same as it was with the 305s.
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
107
Looks good, I may need to get some 295 series 26" tires with all my rubbing!
 

Conor

"Bob's your Uncle"
Joined
Apr 30, 2009
Posts
1,103
Reaction score
2
Location
Seattle, WA
Looks good bro. I love the ASANTI grill. I wish I could hear that horn
 
Last edited:

PACE

Full Access Member
Joined
Sep 6, 2009
Posts
97
Reaction score
2
I used a couple zip ties and just pulled the interior wheel well lining back a bit. worked great with no cutting and no visit's to the shop!

p.s.- cut your grass dude! LOL
 

NORCAL SS

SUV SUSPENSION GURU
Supporting Vendor
Joined
Jun 9, 2009
Posts
8,744
Reaction score
605
Looks great man!!!!!!!!!!!
 
OP
OP
timjohnson22

timjohnson22

Full Access Member
Joined
May 15, 2010
Posts
375
Reaction score
10
Location
GEORGIA
Thats my Nextdoor Neighbors grass, mine is cut. I have been trying to get him to cut it.
 

Forum statistics

Threads
129,439
Posts
1,816,085
Members
92,656
Latest member
Kaptainkhaos58
Top