Replacement Shocks

[DaleJr]

Hey guys I just replaced my rear springs with the moog 81069 and my measurements before were: left- 38", right -37&3/4's and now they measure: left 39&5/8's, right-39&7/8's as you can see that raised the rear almost 2" so my shocks are topping out every time I hit a big bump in the road, and they are the smooth ride shocks and want to go ahead and replace with the bilstein 5100 series and I noticed they have 2 different part numbers: ones for 3" of lift 24-185783 and the other is for 0-1" of lift 24-187237 I'm assuming the 24-187237 are the ones I need. Will someone please verify this is correct and will solve my current problem? thanks!

 

[TheAutumnWind]

Yup that'll work for you.

 

[DaleJr]

Yup that'll work for you.

Awesome thanks man!

 

[carduke]

You can go here http://cart.bilsteinus.com to confirm the correct product number. Bilstein's are nice shocks, but if you want a cheaper yet good alternative, rancho shocks are a good choice.

 

[DaleJr]

You can go here http://cart.bilsteinus.com to confirm the correct product number. Bilstein's are nice shocks, but if you want a cheaper yet good alternative, rancho shocks are a good choice.

Yeah that's exactly what I did, but noticed 2 different shocks listed under the 5100 series but figured it out. I bought the bilsteins for $139.26 shipped which isn't bad at all

 

[TheAutumnWind]

You can go here http://cart.bilsteinus.com to confirm the correct product number. Bilstein's are nice shocks, but if you want a cheaper yet good alternative, rancho shocks are a good choice.

Meh ranchos are just Tenneco shocks... with red shock boots. they make Monroes too.