Offset Question?

[STEELHORSE]

I've been looking at different wheels for my Yukon the last 3 weeks. And studied offset and back spacing over and over. I was wondering how far a +12 offset would stick out, as well as a +1 offset, and lastly a -12mm offset.

I thought I wanted -12 but am not sure, my vehicle does have a lift so fitting shouldn't be a problem. Thanks in advance for any answers or opinion. Btw the wheels are ultra phantoms in 18"

 

[Maic]

Think stock is around +33. I have +13 offset (stock height) and are about flush with the fender in the rear.
+1 would come out by 1/2" and
-12 would come out by 1" (this is based on my +13 offset what is about flush).

Since you're lifted, you have a wide range of offset to play with.
If you see some lifted member rides here you like, just pm them for there offset.!

https://flic.kr/p/thGAqHhttps://www.flickr.com/photos/133368839@N02/

 

[STEELHORSE]

Thanks for the reply, I'm going to see how much a friend of mine can get the +1 offset ones for, cause he runs and tire shop. If too much I'll end up running a -12 since I've already found a place to buy them and price. I wanted them to stick out not too much but not be sunk into the fender wells either.