Hey guys, I just got a 2001 Yukon and bought a hi lo converter to hook up my additional amp/subs. Before I get started on this project I wanted to ask where the most convenient and correct location is to tap into the existing speaker wire?
Hi Lo Converter Install
- Thread starter topper07
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
blueflamed03
Supporting Member
Need more info...Bose, or Non-Bose factory system?
It is the non BOSE factory system. For some reason I wrote 2001 instead of 2002.... must have been late hours. I was told that the LR + was brown, LR - was yellow, and the RR + is dk blue, and RR - is light blue, and that those four wires should be in a row on the wiring harness. However there was no yellow wire or light blue, the wires that I am assuming are brown, brown, blue, and a black. Any insight?
03tahoe2012
Full Access Member
bump
groundscr8pr
flaccid member
in the driver side rear pillar or at the amp behind the glove box.
03tahoe2012
Full Access Member
what color wires is what i need 
Similar threads
