350 engine blown cracked heads

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jedi-GT

Member
Joined
Jan 28, 2016
Posts
73
Reaction score
0
My 99 2dr yukon was was getting new top gaskets redone with a replacement delphie injectors (ACDelco)

I started off with engine temperature going banana on me.
ATTACH]



First I had to release the steam off to cool it to start disassembling it for the flush and rebuild.

Went and got a replacement thermostat and a reservoir. All pipes seems in good condition

ATTACH]

ATTACH]

ATTACH]

ATTACH]

 

Attachments

  • uploadfromtaptalk1457699614902.jpg
    uploadfromtaptalk1457699614902.jpg
    54.4 KB · Views: 0
  • uploadfromtaptalk1457699743647.jpg
    uploadfromtaptalk1457699743647.jpg
    67.2 KB · Views: 0
  • uploadfromtaptalk1457699754941.jpg
    uploadfromtaptalk1457699754941.jpg
    38.5 KB · Views: 0
  • uploadfromtaptalk1457700414302.jpg
    uploadfromtaptalk1457700414302.jpg
    80.5 KB · Views: 0
  • uploadfromtaptalk1457700604567.jpg
    uploadfromtaptalk1457700604567.jpg
    90.9 KB · Views: 0
OP
OP
Jedi-GT

Jedi-GT

Member
Joined
Jan 28, 2016
Posts
73
Reaction score
0
After I got the radiator done

The radiator showed symptoms of gaskets issues

I ended getting gasket kits and a delphie upgraded injectors.

Knowing those kind of engine are known to have cracked cylinder heads so I was prepared for the worst.

ATTACH]

uploadfromtaptalk1457700839180.jpg
uploadfromtaptalk1457700852452.jpguploadfromtaptalk1457700865148.jpg

Both heads were cracked
 

Attachments

  • uploadfromtaptalk1457700827652.jpg
    uploadfromtaptalk1457700827652.jpg
    72.5 KB · Views: 0
OP
OP
Jedi-GT

Jedi-GT

Member
Joined
Jan 28, 2016
Posts
73
Reaction score
0
I was able to get two new OEM heads from GM for about 200 bucks.

Also, I was able to find and LS2 engine.

My question will be ... will it be a direct plug and play for the LS2 engine?

Second option would be upgrading the crank shaft with the stock heads. Does the corvette crank shaft fits? What other option do I have for a stage 2 performance? (Header, exhaust system, spacer, crank shaft, air filter etc)

[
 
Last edited:

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
184
Location
unknown at this time.
going to an ls2 from a vortec obs or tbi is a big change in wiring and components. doable but not plug and play when you make the changes yourself.
 

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
212
I was able to get two new OEM heads from GM for about 200 bucks.

Also, I was able to find and LS2 engine.

My question will be ... will it be a direct plug and play for the LS2 engine?

Second option would be upgrading the crank shaft with the stock heads. Does the corvette crank shaft fits? What other option do I have for a stage 2 performance? (Header, exhaust system, spacer, crank shaft, air filter etc)

[

You got both heads for $200??? Where at? I need a pair, everywhere I've looked they want $325 or more each!


Sent from my iPhone using Tapatalk
 

SUBURBIAN

All Chevy
Joined
Mar 18, 2016
Posts
177
Reaction score
69
The LS2 is just about the opposite of plug and play.

Why do you want a crankshaft from a corvette?
 
OP
OP
Jedi-GT

Jedi-GT

Member
Joined
Jan 28, 2016
Posts
73
Reaction score
0
You got both heads for $200??? Where at? I need a pair, everywhere I've looked they want $325 or more each!


Sent from my iPhone using Tapatalk
I think I was lucky with the price

I grabbed it immidiatly before the error correct it self.
 
OP
OP
Jedi-GT

Jedi-GT

Member
Joined
Jan 28, 2016
Posts
73
Reaction score
0
The LS2 is just about the opposite of plug and play.

Why do you want a crankshaft from a corvette?
I read somewhere that the corvette crank would fit the 350 but I've yet found a valid document that supports it
 

Forum statistics

Threads
129,511
Posts
1,817,035
Members
92,725
Latest member
Jcruz71
Top