Recent content by RotaryMachineRx
-
Spark Plug Change Misfire
Unfortunately I don't have an OBD2 reader for this vehicle as it is pretty much completely stock apart from exterior mods.- RotaryMachineRx
- Post #4
- Forum: Engine & Drivetrain
-
Spark Plug Change Misfire
Well I'm going to chalk it up to a bad spark plug. I ended up pulling plugs out one at a time and swapping the old plugs back in. Ended up finding the plug on the third attempt. I can't see anything visibly wrong with the plug (no cracks, tip in good condition) but as soon as I swapped that one...- RotaryMachineRx
- Post #3
- Forum: Engine & Drivetrain
-
Spark Plug Change Misfire
Changed all of the spark plugs and wires on my 2012 Tahoe. I removed one spark plug at a time, hand tightened all plugs in then tightened with a ratchet/socket. Popped all wires back on ensuring to hear a nice click. Now I am getting a very rough idle and a CEL on my dash (solid, not flashing...- RotaryMachineRx
- Thread
- Replies: 6
- Forum: Engine & Drivetrain
-
-
Get a catch can before any mods.
So let's say you're changing your oil every 4000 miles... You're saying that people are losing/adding 8 quarts of oil to their engine because of the PCV circulating into the intake in between every oil change.... Get real- RotaryMachineRx
- Post #316
- Forum: Performance
-
Get a catch can before any mods.
Have you ever noticed the oil on your dipstick getting low because of it though? No.- RotaryMachineRx
- Post #314
- Forum: Performance
-
Get a catch can before any mods.
It's not necessarily a "problem", the oil vapour circulation is by design, albeit a poor design your engine will run perfectly fine for years without a catch can. It is for those of us who prefer to keep the throttle body/intake manifold cleaner. There is risk for this stuff to gunk up over time...- RotaryMachineRx
- Post #312
- Forum: Performance
-
Just bought some Dub Baller wheels and.....
Nice that's what, I'll be going with for the next set of rubber.- RotaryMachineRx
- Post #29
- Forum: Exterior
-
-
RMR's 2012 Tahoe
Wow didn't realize I never responded to this.... 26" with 305/30/26 rubber on them- RotaryMachineRx
- Post #4
- Forum: Exterior
-
Just bought some Dub Baller wheels and.....
Nice man! What tire specs did you go with?- RotaryMachineRx
- Post #27
- Forum: Exterior
-
Nominations for May 2015 TOTM..... Sponsored by BLACK FLAME CUSTOMS !!!
Still a work in progress but here's where I'm at.- RotaryMachineRx
- Post #23
- Forum: Nominees & Voting
-
RMR's 2012 Tahoe
Hey all, just thought I'd share some photos of my build now that I got my wheels on. Still having some rubbing issues even after doing Tony's 2x4 mod. I think I need to work the liners some more still, I rented a heat gun; which ended up not even working; so I'm gonna get my hands on one that...- RotaryMachineRx
- Thread
- Replies: 3
- Forum: Exterior
-
Just bought some Dub Baller wheels and.....
^ I have a set of 24's for sale.... PM me if you're interested- RotaryMachineRx
- Post #25
- Forum: Exterior
-
Get a catch can before any mods.
Yeah I didn't get overzealous with it, just took a quick glance at it and fumbled around with it.... I'll try prying the hose off; don't think there should be any need to remove the fitting itself if not required.- RotaryMachineRx
- Post #295
- Forum: Performance
