Recent content by MotownYukon

  1. M

    Outside starter bolt hole broken

    So my 95 yukon 2dr started to make a strange noise when starting. It sounds like the starter is grinding against the flexplate. I crawled under the truck to find the outermost bolt missing, broken off below the mounting surface. Tried to drill out the remaining bolt but didn't do it right and...
  2. M

    Knock Sensor

    OMG SunlitComet responded to my post!!! :elephant: I feel honored!!! I totally will take a look at the Borg-Warner Knock sensor... I may have to hunt down the wire that it connects to, because fairly certain that it broke (there's no pigtail there)... What color is the "hot" wire, because...
  3. M

    Knock Sensor

    Would anyone have the part number for a Knock Sensor for a 95 Yukon 2DR, TBI non-Vortec?? I've looked and I can't find the OEM part number...
  4. M

    NEW 17 inch black OEM GM ppv rims-$500 plus shipping

    Uh... you DO realize this thread id over a year old, right??
  5. M

    95 yukon DEAD

    Well, if YukonandtheHOE is ever in Detroit, I'll buy him a beer (and some kevlar)!!!
  6. M

    95 yukon DEAD

    So here's the skinny... it was in fact the bundle of wires which include the starter wires had melted through the loom and fused itself to the block near the bottom of the block... I pulled it away from the block and replaced the 40 amp fuse and it fired up straight away... It was raining...
  7. M

    95 yukon DEAD

    I'm thinking it's the starter... I bought a new one because I thought the dragging while starting thing was because the starter was going bad... I removed the starter and put the new one on but it was still dragging like the battery was dying, so I put the original back on... With that said...
  8. M

    95 yukon DEAD

    Isn't the starter solenoid part of the starter itself?
  9. M

    95 yukon DEAD

    No... my starter wire is connected to the positive battery head under a clamp...
  10. M

    95 yukon DEAD

    So... yes, it IS in fact the IGN-A fuse that blew... I put another one in and that blew too... When I put the fuse in, all my dash lights came back, but as soon as I turned the key to crank, not only did the starter not do anything, the fuse blew immediately.... All wires and grounds were...
  11. M

    95 yukon DEAD

    I'll have a peek at the fuses and relays in the morning... Any recommendations on what I should get, a circuit breaker or a big 40 amp fuse? As an aside, I'm mad I just paid $60 to fill the hungry bastard up and it thanks me by taking a huge shit on me...
  12. M

    95 yukon DEAD

    What he said...
  13. M

    95 yukon DEAD

    I actually just bought an ICM from a fellow member here (thanks Escahoe) but I haven't put it on yet... Other than it dragging a bit while cranking like the battery was dying, I never had any problems starting the truck...
  14. M

    95 yukon DEAD

    Since I had a SES on my dash, even if the truck wasn't all the way in park (it is, I checked) wouldn't at least that light still be on? I turn my key, and I get no battery light no check gages light no SES light no lights on the dash at all, and all lights worked and we're present when I tried...
  15. M

    95 yukon DEAD

    So I drove my truck home from work as I normally do... no issues... no weird noises or anything... I park the truck in a spot and turn it off but then I saw my truck was crooked so I hop back in it to straighten it out... I turn the key and it tried to start then...NOTHING... Dash lights are...
See more

Forum statistics

Threads
129,242
Posts
1,812,720
Members
92,344
Latest member
SDHanz

Latest posts

Top