#gmt800
-
Y
2000 GMC Yukon XL 1500 SLT 2WD (5.3L) - Brake Pedal Goes to the Floor
I’m hoping someone with GMT800 experience can help because I’m running out of ideas. This all started after replacing a brake line at the ABS module. Since then, the brake pedal goes straight to the floor with almost no resistance and I have little to no braking. Here’s everything I’ve done...- YukonXL813
- Thread
- #gmt800 abs brake problem stumped
- Replies: 17
- Forum: Engine & Drivetrain
-
N
Do i need a specific knuckle for a 6 in lift kit
I'm new and clueless to lifts, my father is the actual owner of the 2004 yukon 4.8 rwd I'm referring to. He paid a shop to install a RC 6" lift kit but they botched it and outright didn't install everything, I already replaced the wheel bearings, center link, inner/outer tie rods, pitman/idler...- newtogmc
- Thread
- #6inchlift #gmt800 #liftedyukon
- Replies: 6
- Forum: Lifted Supension - Z71 & 4x4
-
Can i put 07-14 rotors/brake pads with SureStop calipers for 00-06 tahoe
Found a great deal on rotors and pads but im hesitant to jump on them and risk the diameter of the rotors being too large for the red Sure Stop calipers i have. Any info will be helpful! Thanks in advance- Kungfubenny
- Thread
- #gmt800
- Replies: 4
- Forum: Engine & Drivetrain
