Search results

  1. BeenChevy

    Show off your 2015+ leveled Tahoes and Yukons!

    I think you'll rub the upper control arms a bit when attempting to turn full lock with the 33x12.5 - I did. Not that big of deal if you get used to it. I think 2" wheel spacers could have you rubbing the rear fender well. Maybe try a 1" spacer and see where that gets you. I recently posted a...
  2. BeenChevy

    Mini Norcal mod for Yukon Denali XL

    Heck yeah - sorry about the lack of video-skills but at least you can see where I cut. Way too easy. Took through the local river bottom up/down steep grades with some reverse driving over bumps and no issues. Other tires at stock offset with RC UCA's: 33x12.5/20 Trailblade M/T inner...
  3. BeenChevy

    Mini Norcal mod for Yukon Denali XL

    Finally got around to taking care of wheel rub on the Yukon. This made for zero rub with 295/60/20 Atturo X/T which are 34.2" diameter. Section width is 11.5" Suspension Maxx lift 2.75" front 3.5" rear First video using the gopro but basic technique once you have the wheel off and carpet...
  4. BeenChevy

    Show off your 2015+ leveled Tahoes and Yukons!

    Suspensionmax. Just modified the rear-end again though by cutting the oem bump stops and moving them to the top of the axle. The sumo springs now just barely touch them. What an awesome improvement compared to the energy stops I had installed on top of the axle.. Huge improvement at highway...
  5. BeenChevy

    Which rooftop cargo carrier?

    Have a photo of the packaport?
  6. BeenChevy

    Tires rubbing after lift and spacer install

    +1 on the Norcal mod. On the 15 Yukon, have a few different sets of wheels and they ALL rub a little, more-so when backing up: Summer - 33x12.5x20(32.8" diameter) Winter - 295x55x20(33" dia.) Long-distance hauling - 295x60x20 which are 34.2" diameter and the tallest yet. MaxxSuspension...
  7. BeenChevy

    Rusted out & Leaking Brake lines - Brake line Diagram

    Finally a small crack in the stock 01 Yukon SLT. Had planned on ordering pre-bent stainless lines and then read on here the NiCopp EZ-fit are the way to go? Only a few bucks more. Thanks for the tips. Was otherwise thinking of spraying the pre-bent with Rust-Oleum
  8. BeenChevy

    Show off your 2015+ leveled Tahoes and Yukons!

    39 1/8" Front & 38 3/4 Rear with the 32' camper hitched. 2.5" lift up front 1.5" rear. 295/55/20
  9. BeenChevy

    TPMS Relearn 2015+

    Doesn't matter. Mounted all mine sideways in two sets of wheels and never had any trouble. I put the tps tool against the sidewall next to valve stem when programming. Not sure it matters but works every time
  10. BeenChevy

    HansJr 05 Bermuda Blue Build...

    Remember - Progress not perfection. Yeah, I feel you on the NO TIME FOR ANYTHING days. 5 young kids, multiple jobs, and WAYYYY to many hobbies will do that. Hard work, Trust, and following Him = doing what we're suppose to while we're here. The rest just follows. Still like how it's coming...
  11. BeenChevy

    POWERSTOP Z36 Truck and Tow Performance Kit

    I want to try the Power slot cryo rotors
  12. BeenChevy

    POWERSTOP Z36 Truck and Tow Performance Kit

    The price and performance are good in my opinion. Having purchased these kits multiple times for multiple vehicles, the longevity of the rotors is sub-par even with seldom towing in my opinion. Consider a better more durable rotor is my suggestion.
  13. BeenChevy

    POWERSTOP Z36 Truck and Tow Performance Kit

    I like them. Fairly quiet, low dust, great bite. Rotors don't seem to last more than a few years though. Installed power stop rotors on the 05 tahoe & twice on an 01 yukon have worn VERY fast.... They didn't warp but start to thin quicker than OEM and you can see the vents become less and...
  14. BeenChevy

    2020 Tahoe LT build

    Looks great. Lemme know how you think it rides.
  15. BeenChevy

    2020 Tahoe LT build

    Is that the 3" kit with fox 2.0 shocks? If so, I recommend a 1.5" extended link on the lower rear shocks and clearancing the rear bump stops with sumo springs to match stock stops for your gear and/or option of towing a trailer because it's a tahoe. Cognito front and rear sway bar links +...
  16. BeenChevy

    Anyone install a catch can kit on a 6.2L?

    Got your post. Checking at 50% oil life. UPR dual setup w/ CCS after 45K. Dumped every 5k oil change
  17. BeenChevy

    Suspension/Handling upgrades after leveling

    Dang. This 8y/o post bright back memories. Thanks for the laugh on the lowering. You're absolutely right, lowering would have improved my handling back then. Since then though I've found loads of options and that truck handles great even lifted. Welcome to the forum enginehead
  18. BeenChevy

    A wavy of Vibrations as i drive at 50mph

    Figure I'd chime in as I dealt with this and resolved it on mine. At first I thought the globs of grease on the rims that sometimes fall off the joints up front - nope, then thought maybe the tires - nope, u-joints - nope, then maybe the torque converter or transmission - nope... then before a...
  19. BeenChevy

    Anyone install a catch can kit on a 6.2L?

    Going too cheap on an oil catch can isn't smart. Improper setups lead to oil ingestion and can cause catastrophic engine failure. Better NOT to have one installed than going cheap. If you want a decent setup for cheap; make it yourself or checkout dual valve setups with proper check valve's...
  20. BeenChevy

    Dash camera - best routing for power in yukon

    Looks like half-installed cheap garbage. want one that works check out the UPR dual valve setups with the Oops. Looks like you forgot to finish installing that piece of garbage. The thread is for best routing "dash cam", not cheapo "garbage can".
  21. BeenChevy

    Easy 4-Hi mod - Simple All High Chip 03-06 model years

    Yeah somewhat of a gimmick mod but nice not having to toggle between bulbs with the HID's. Do you have depo housings yet? those made a big difference for me. Running 55W HID in both hi&low
  22. BeenChevy

    air bags or stiffer springs?

    Those are 4"x2"? If so, may make more sense to install what I did in your stock location and then add more to the BDS axle stack. They'd fit the stock location are 4" diameter and about 5.5" tall. Been looking getting some of the leaf spring ones for the trailer after looking into them more..
  23. BeenChevy

    air bags or stiffer springs?

    Yeah they're only about 5.5" tall. The springs you're talking about go in the bump stop location? Think I've seen the 3 1/2 ton setup on youtube if that's what you're referring to. You using a weight distributing hitch?
  24. BeenChevy

    air bags or stiffer springs?

    How much weight are you putting on your tongue now with the 4" lift? I'm 2.5" up front and 1.5" in the rear on the XL with fresh magride and auto level pushing air in the rear. Ended up swapping in the sumo springs a couple days ago and took the 32' travel trailer for a test drive just on the...
  25. BeenChevy

    air bags or stiffer springs?

    This below the jounce bump-stop on the axle isn't stock, is it? I was looking to make a set of these..

Forum statistics

Threads
129,117
Posts
1,810,704
Members
92,203
Latest member
firedog9518

Latest posts

Top