Search results

  1. _Dylan_

    OEM Fog light switch

    2wd tahoes with a fog light option IIRC That particular switch will be extremely hard to find though.
  2. _Dylan_

    Factory options

    are you serious?
  3. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    I was in the middle of working on it and kinked that line, so I went down to Advance and bought one. I don't even remember the brand...some chinese made one. I used their $40 off $100 online deal. Dropped the price of the condenser to $75. Not bad. I wanted to get a denso for around $65, but...
  4. _Dylan_

    A/C system replacement with rear air, guidance please.

    bro, you work in refrigeration. You should've done this a long time ago. :) Denso makes good condensers too, and they are very reasonably priced @ around $65. I read Sanden makes an upgraded compressor that isn't supposed to leak like the HT6 design. My compressor is still working, but...
  5. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Charged it with about 2.5 dust off cans. The air is pretty cold now. Colder than I remember it with the r134a. I wish I had a thermometer to check the vent temps. I may have to play with the amount of charge in it. Right now pressures are about 30/150psi which is low, but this refridgerant...
  6. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Been working on the a/c system this week. The lower connection on the condenser was seized and I ended up twisting the line on it and kinking it. Yay, new condenser and a/c line too. Good thing is parts for this turd are cheap and it seems to be holding a vacuum just fine. I'm into it for...
  7. _Dylan_

    Adjustable Pedals mod?

    +
  8. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    I've done that twice already. :)
  9. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    That's what I was trying to do, but the top of the core sheared off and I can't remove it now. It needs a new manifold line. When I get done moving next week I'm going to flush it, put new seals on, new drier, new orifice tube, put a vac on it, and try putting 21oz of computer duster...
  10. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Went to change the leaky schrader valve on the low side a/c port, but it was completely seized and I broke the tip right off it. It ain't coming out now. The good thing is GM in their infinite brilliance designed the serives ports to be welded the manifold so I gotta replace the entire...
  11. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Put some wipers on it lol. Might change the oil this weekend.
  12. _Dylan_

    Was the condensor fan an option?

    some of the heavier duty trucks had them
  13. _Dylan_

    barn door to tail gate conversion?

    interesting, post more pictures please
  14. _Dylan_

    keyless entry

    Take a paper clip and jump the #4 and #8 pins on the obd2 connector. The locks should cycle if you have keyless entry. To sync the remote, jump the two pins on the obd2 connector and wait for the locks to cycle. Then hold down the lock and unlock buttons on the remote until the locks cycle...
  15. _Dylan_

    Blower motor on 1997 Tahoe

    Blower motors typically don't pass through the resistor on the highest setting. pdf of the blower motor wiring on my '97: http://docdroid.net/rysj Could be a couple of things. Obviously check all the fuses first. Then I would check for 12 volts at the plug on the motor with the fan on high.
  16. _Dylan_

    2DIN Stereos

    The factory radio is 1.5 DIN. Aftermarket 1.5 DIN stereos are long obsolete though.
  17. _Dylan_

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Built a mount for my 12 gauge, I still have to wire the release for the lock though. My headliner is DIRTY.
  18. _Dylan_

    Bump stop part # or factory size ?

    lmc truck has them
  19. _Dylan_

    speedometer looses signal when going over bumps.

    check to see if the VSS is plugged all the way in?
  20. _Dylan_

    Protecting underbody

    spray the shit out of it with oil
  21. _Dylan_

    cruise issues

    have you checked the cable going from the cruise motor to the throttle body to see if it's snapped or seized?
  22. _Dylan_

    Forums you use

    gmt400.com
  23. _Dylan_

    99-00 DENALI (Escalade) Center Console

    99-00 DENALI (Escalade) Center Console SOLD I was going to use this, but I decided to do something else. It's out of a 99-00 Denali in the junkyard. Grey in color. Typical pealing paint. Leather is in ok shape. No key for the lock. Broken/missing rear cup holder. All of...

Forum statistics

Threads
129,127
Posts
1,810,892
Members
92,215
Latest member
mitchievu
Top