Search results

  1. SuperDave

    Steering wheel with audio control swap question

    Direct swap ,did it to my 2010 PPV along with the escalade shifter that has the tow/haul button.
  2. SuperDave

    New SSV here from Northern IL, with a new headache

    Surprised I haven't seen you around, I'm up in Antioch.
  3. SuperDave

    07-14 PPV shock / strut part number verification please :)

    These have your option code 6PB
  4. SuperDave

    07-14 PPV shock / strut part number verification please :)

    Go on rockauto and scroll through the OEM options and read rhe descriptions, they'll list the SPID label options for that particular strut/shock.
  5. SuperDave

    07-14 PPV shock / strut part number verification please :)

    If you look at your SPID label it will tell you what suspension package you have, ive been researching these struts because ill be replacing mine soon. ive found my front struts are option codes 6DA,7DA which brings me to part#540-618
  6. SuperDave

    Front passenger door skin getting stuck on door seal

    Same thing is going on with my 2007, same door same issue lol. I have to take the door panel off anyways to replace the handle and cable so I also plan to replace all the door panel clips while the panel is off.
  7. SuperDave

    Just got a tahoe ppv. What do you recommend for shock absorbers?

    As someone who's dealt with Bilsteins and PPV springs, i would advise against the 4600's in favor for the 5100's. The 4600 series are way to soft for this rigs an should only in my opinion be used for factory replacement when comfort is #1 priority, my suggestion is the Eibach strut shocks or as...
  8. SuperDave

    Checked my engine hours today

    My 2010 PPV has around 150k on it, when I bought it the dash showed around 6k hrs on it. Recently had some work done to it that required a dealer visit unfortunately, after picking it up noticed the hours were reset and now shows around 16hrs when i actually seen it.
  9. SuperDave

    Considering L96 6.0 Swap - Initial questions

    I did the 6.0 swap in my 07 tahoe, I bought a used LY6 that had spun cam bearings, I took it to the machine shop where they did their magic on the block, they bored the cylinders out 20 thou installed new pistons and polished the crank. After all was done the only thing original was the block...
  10. SuperDave

    Passkey reset issues

    Any updates?? I'm dealing with the same issue on my 10 PPV
  11. SuperDave

    Need help choosing correct Denso radiator 2012 SSV

    My personal opinion is to delete the factory oil cooler and run an aftermarket external cooler for better cooling performance. My 2010 PPV coolant temps run hotter (200*-210*) with oil temps around the same, compared to my built 6.0 swapped 07 with just a standard radiator and no external cooler...
  12. SuperDave

    WHAT OIL PUMP AFTER AFM/VVT DELETE?

    Melling 10295 standard volume high pressure pump in my 6.0 swap 07. Hot idle sits at 35psi all day, running an external oil cooler will help gain some psi aswell.
  13. SuperDave

    Suggestions for quiet aggressive looking tread tires

    I love the General Grabber AT's compatible to the KO2 but better in my opinion. Quite on the roads and great in the rain/snow, all around zero complaints with them.
  14. SuperDave

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Replaced the bad BCM and programmed it only to now have a CEL for the crank position sensor :rage:
  15. SuperDave

    Largest 17" tires without a Life

    I ran 275/70/17's on PPV rims on PPV springs rode great
  16. SuperDave

    Fog lights

    You can easily run an external rely harness and tap into the marker light to add fog lights, I did it on my 9c1 impala and worked great. That amazon kit will install, but you'll still need the BCM flashed to enable the fog light option.
  17. SuperDave

    Tech 2 Owners Map

    Dave Northern IL/Wis border GM MDI programmer
  18. SuperDave

    Fog lights

    You most likely have LED flashers/wig wag pods installed in the fog light spots and they aren't actually fog lights. arent
  19. SuperDave

    Eibach Rear Springs on CLEARANCE

    I installed Eibach/bilsteins on mine, it sat very nice but rode a little to soft for my liking.
  20. SuperDave

    2008 Yukon with LQ4 Engine Mod Questions

    Time to bring this back from the dead. Did you ever figure this out, I'm in the research phase on getting my swap done. So far what scares me is the reluctor wheel on the crankshaft. Any tips on tackling that?
  21. SuperDave

    PPV suspension for non-PPV Tahoe

    The front springs from what I gather are the same as any 2wd Silverado. The rears are in fact a separate part # related to the PPV. The lower stance is related to the short sidewall tire used.
  22. SuperDave

    LED Fog Lights For 07 Tahoe

    I went on ebay and found these completely plug and play. Search fog lights for the newer Camaros and these should pop up there.
  23. SuperDave

    2008 PPV - SUSPENSION UPGRADE

    Sell me your front springs if and when you go through with this.
  24. SuperDave

    I have a simple question about Shocks and springs.

    I have Eibach/bilstein all around ride is a little bouncy but not bad at all.
  25. SuperDave

    Parting out NNBS Escalade

    Still parting it out?

Forum statistics

Threads
138,089
Posts
1,998,642
Members
103,014
Latest member
john1989

Latest posts

Back
Top