Search results

  1. T

    Yukon AT4 suspension issues

    Pro comp is definitely reputable! I'm not sure either, but i do know a guy on a facebook group added a non magneride kit to his at4 and had all the sensors twist and throw codes etc. Maybe call readylift and ask if they would just sell the sensor relocation brackets?
  2. T

    Yukon AT4 suspension issues

    When I was looking at levels/lifts I went with the readylift because it was well designed and included sensor and wire relocation brackets. Not trying to be rude, but this kinda looks like it could be a cheaper level kit, or potentially an installation issue?
  3. T

    Anyone Running Kings or ICONS?

    Looks great! Can you drop a part # for the upgraded rear control arms? I did the readylift kit on my wife's at4 because it was the only one that retained the magneride but it didnt come with extended rear control arms.
  4. T

    Towing up Mountain Pass - 210F Engine and 199F Transmission

    Those numbers are fine, if not great. 100 degree's over outside ambient temp while towing is normal.
  5. T

    Lifted/Leveled 2021 - Postem Up

    - 3 inch SST readylift - Fuel heater 20x9 +1 offset - Stock Wrangler AT's 275/60/20 Will run ridge grapplers or AT3's in one size up once these wear out. Even without going up in tire size, the offset change from stock wheels is causing a slight rub on the bottom front liner and plastic at...
  6. T

    Whats needed to run 33x12.50r20?

    Can you take pictures of how they trimmed the front? I have 20x9 +1mm offset with the stock 33x10.8's and have a slight rub at full lock on drivers side even with a 3 inch readylift.
  7. T

    Park assist Retro. Yukon

    Dealer called my parts are in, retrofit next week. They said 1.5 hours install time. I highly recommend calling and asking the status of your retrofit. My original dealer took my VIN and said they would call as soon as parts were available for order. I got my oil changed at a dealer closer to...
  8. T

    Park assist Retro. Yukon

    My dealer just told me my parts on order for this retrofit. 22 AT4
  9. T

    Lifted/Leveled 2021 - Postem Up

    FWIW, rough country looks like they are now offering a magneride compatible 2.5 lift with UCA's for at4 models, or any other configurations that come with Magneride and not air ride. Only difference from readylift kit seems to be the RC still uses a pre-load and strut spacer in the front where...
  10. T

    Is there a 1" or 1.5" or 2" leveling kit for '22 AT4 Yukon with magnetic ride control?

    any update @WacoYukon ?
  11. T

    Looking for thoughts on a setup..........

    @FatDog did you get the P 285/60/20 AT3's or the LT's? I'm currently between 285/60/20 AT3's or 295/60/20's that only come in LT's but would only would gain .4 on height and .3 on width over the P metric 285/60's.
  12. T

    Is there a 1" or 1.5" or 2" leveling kit for '22 AT4 Yukon with magnetic ride control?

    Sounds good. I'm looking to get that kit so if they can retain all the hardware and parts I would definitely be interested in it.
  13. T

    Will a Canadian vehicle warranty transfer to the US.

    Yes. My at4 from south Ga came from Ontario. no issues.
  14. T

    Is there a 1" or 1.5" or 2" leveling kit for '22 AT4 Yukon with magnetic ride control?

    Wanna make a deal with me for the kit?
  15. T

    Is there a 1" or 1.5" or 2" leveling kit for '22 AT4 Yukon with magnetic ride control?

    My 22 at4 is almost a full inch higher in the rear from the factory (non air ride) . The only kit I'm aware of that will work is the traxda kit. @WacoYukon what are you doing with your readylift kit?
  16. T

    Lifted/Leveled 2021 - Postem Up

    Any long(er) term reviews from anyone running the readylift 3 inch SST lift? Looking to put it on my wife's 22 at4. Curious about overall ride quality vs stock and if anyone has had any component failure i.e Magneride shocks going out/cv axle's etc. 3 inches seems like a lot without dropping...
  17. T

    22 Yukon AT4 Slack on acceleration

    Just wanted to update this thread in case someone has this issue in the future. My wife's car was in "auto 4wd". From my understanding GM claims it's fine to drive in this all the time, but really only recommended it in less than optimal road conditions. I cant imagine that it wouldn't expedite...
  18. T

    2021 Yukon slips when accelerating.

    lol, well glad it's resolved! Drove my wife's car for an hour and a half yesterday and the bump was gone.
  19. T

    2021 Yukon slips when accelerating.

    FWIW, I noticed my wife's car was in "auto". I know GM claims it wont damage it to leave it in auto, but obviously there is no need to leave it in auto for daily driving if the car is a pavement princess. I switched it to 2wd, and could not get the slight random thud to replicate. I only drove...
  20. T

    2021 Yukon slips when accelerating.

    I'll do the same.
  21. T

    2021 Yukon slips when accelerating.

    Any luck finding your issue?
  22. T

    22 Yukon AT4 Slack on acceleration

    That could be it, seems like a similar issue. Dealership will scan it next week so we'll see, no lights thrown currently.
  23. T

    22 Yukon AT4 Slack on acceleration

    I thought it was that at first, but it does it on flat ground. To me it feels like a bad motor mount but I'd be shocked at 11k miles if that was it and if it was bad, I assume it would do it non stop not random and intermittently. Oil change almost due so may see what the stealership says, but...
  24. T

    22 Yukon AT4 Slack on acceleration

    No, jUst happens in around town driving, red lights etc.
  25. T

    22 Yukon AT4 Slack on acceleration

    Anyone have any driveline slack coming from a dead stop? My wife's yukon at4 will do it one out of every 10 or so stops. No loud clunking, just a bump or driveline slack feeling right after acceleration. More noticeable on an incline.

Forum statistics

Threads
137,685
Posts
1,989,581
Members
102,686
Latest member
koomie98

Latest posts

Back
Top