Search results

  1. D

    Clunks when turning and on uneven ground

    Take a look at the torsion bar hex and socket fit in the control arm. If you can see a space between the hex and socket, fashion thin wood wedges and drive into the spaces. Test drive over the uneven terrain and determine if any improvement.
  2. D

    I need experienced help re: Water pouring out exhaust

    Does the Tahoe have a rear heater? I cannot find a clear path for coolant to flow out the exhaust of the engine while pouring the coolant in the overflow container. I can see a clear path for coolant to freely flow from the heater pipe/hose that is located near and above the exhaust outlet...
  3. D

    Alternator Suggestions

    Original amp rating is 105 and 145 optional.
  4. D

    Tahoe started to run weird!

    NGK Laser Platinum Plug Number PTR5D-10 Spark Plug is my choice. They cost more but last the longest. Save the invoice and document the mileage. they have milage warrenty. Cost around 14.oo each. Fill the gas tank. If you have the tools check fuel pump. Fuel pressure should go to around...
  5. D

    How in the F do our thermostats work???

    Coolant is drawn from the radiator outlet and into the water pump inlet by the water pump. Coolant will then be pumped through the water pump outlet and into the engine block. In the engine block, the coolant circulates through the water pump outlet and into the engine block. In the engine...
  6. D

    Centered Exhausts 06 Escalade

    I think roll pans are listed on ebay.
  7. D

    Seriously WTF Spindle Issue Still

    I would adjust the torsion bars so that the bumpers are just touching the lower control arm. Then adjust side to side height so that frame is level. Then check and adjust camber, castor and toe-in to spec.
  8. D

    2002 Yukon VIN help needed

    Looks like it had a transmission failure in 2001.
  9. D

    Engine oil leak above oil filter

    Oil cooler block off gasket may be source. Fel pro number for gasket is 72435. Gasket for oil cooler junction block is Dorman 66218 or Malhe B3 1872 or Felpro 72462. The junction gasket has captured o rings. The block off has a slot,
  10. D

    A/C Rebuild Question(s)

    The mechanical seal in the compressor is the common high wear item in the system. I f you have checked all connections with soapy water and rag and fpound no bubbles, the seal is a likely leak point. If you are going to replace "everything," anyway, start with the compressor...

Forum statistics

Threads
138,087
Posts
1,998,579
Members
103,012
Latest member
ScottS-Michigan

Latest posts

Back
Top