rdezs's latest activity

  • R
    rdezs replied to the thread Fastener Torque Specs.
    Just keep in mind that the proper torque values are measured with clean, dry threads.... Unless specifically mentioned, such as arp head...
  • R
    rdezs reacted to Doubeleive's post in the thread Misfires on one bank with Like Like.
    before you go digging into the engine do yourself a favor and do a backpressure test, pull the forward 02 sensor out and stick a fitting...
  • R
    rdezs replied to the thread Misfires on one bank.
    I consider risky to unplug a disabler thousands of miles after it was plugged in.... No data to back that up, but left unused for so...
  • R
    Yes. I'm 10 years older and I always figured it would be me.... New medical team took over last week. You think a new 6L80E is...
  • R
    rdezs replied to the thread Evap Question.
    Maintenance interval for evap system....most wait until there's an issue, but the parts aren't expensive....I did my wife's Escalade...
  • R
    rdezs replied to the thread Evap Question.
    .... Just like the plastic heater hose fittings at the firewall.
  • R
    rdezs replied to the thread Evap Question.
    I would think if the evap solenoid on the intake manifold was stuck closed, pressure would build in a fuel tank.... But I would expect...
  • R
    rdezs replied to the thread Misfires on one bank.
    Ah, I missed the LTFT/STFT readings. Purge valve sticking open....surprised there's no problem starting.
  • R
    rdezs replied to the thread Misfires on one bank.
    ...you might not see any, if it's the purge valve solenoid, or internal in the brake booster....you can temporarily plug off the line to...
  • R
    rdezs replied to the thread Misfires on one bank.
    To me, it sounds like a vacuum leak. (Intake manifold, vacuum brake booster, etc) Mainly because it runs fine at higher RPM, when the...
  • R
    Yes, I had no idea how big the cancer community was until last July. Wife collapsed, erratic pulse, super low blood pressure.... 40...
  • R
    rdezs replied to the thread Evap Question.
    Year, make, mileage, and any trouble codes? If you don't have a code reader yet, most auto parts stores will plug in and read the codes...
  • R
    Lol, roll the dice! It happens enough on the AFM that there's an entire industry built around the delete kits. The best prevention and...
  • R
    Look at the valley cover under the intake. If it's smooth the metal, AFM has been deleted. If it has raised passageways, ticking time...
  • R
    Got it figured out! The new spark plugs i installed had cracked porcelain for cyl 7. Now can drive without limp mode. Still getting...

Forum statistics

Threads
138,115
Posts
1,999,439
Members
103,036
Latest member
Durobans

Latest posts

Back
Top