Recent content by mattbta

  1. mattbta

    Dead spot in steering + discontinued part - SOLVED

    It was Gemini and the response matched my RPO's, but all AI should be verified.
  2. mattbta

    CAT back w/dual exhaust, moderate noise

    Black Widow Venom 250 single in, dual out 3" muffler:
  3. mattbta

    Best radio I've ever had

    a response from OP nearly 4 years later! wow! welcome back.
  4. mattbta

    Dead spot in steering + discontinued part - SOLVED

    Per gemini: The RPO code you are looking for is JL4, which stands for Control, Active Brake (commercially branded by GM as StabiliTrak). Because the StabiliTrak electronic stability control system relies heavily on knowing exactly where the driver is aiming the vehicle versus where it is...
  5. mattbta

    Lost my Key. Need information about the key and transmitter

    There are no chips in our keys, so any blank can be cut to work. The fobs/transmitters/remotes can be added to your vehicle without requiring an original as long as the ones you get are the same frequency range as factory. I believe the frequencies change with the electrical system going class...
  6. mattbta

    Dead spot in steering + discontinued part - SOLVED

    Nice, looks like they have one that accommodates the position sensor mine has. I even replaced that when I was chasing some issues!
  7. mattbta

    Custom switches in my Yukon

    Etsy has some printer folks with designs for accommodating various switch.
  8. mattbta

    6 CD Changer - Replacement? - SOLVED

    I replaced the changer in mine with the part Fless linked - bought via ebay but same company. It worked great. edit: https://www.ebay.com/itm/272193403351 Just recently went aftermarket as part of a phased upgrade with a Kenwood. I'm already missing the CD's but to get a Kenwood that can play...
  9. mattbta

    Dead spot in steering + discontinued part - SOLVED

    Borgeson makes a beefy aftermarket setup; I have no experience with it though. https://www.borgeson.com/99-08-Full-Size-Chevy-GMC-Truck.html BTW - keep an eye on that Dorman bearing if that screenshot is from your order history. Mine fell apart in less than a week. Similar reports seen...
  10. mattbta

    13 suburban cammed misfire vac leak??? - SOLVED

    Nice work. Thanks for tagging solved.
  11. mattbta

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I paid $3.50 for corn on Tuesday. I'm sure it's been high for you out in CO, but that's the highest I've ever paid here in DFW.
  12. mattbta

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    We've never had sniffer test in the counties I've lived in since starting driving, just the OBD-II checks. I would also be curious to see actual results, too.
  13. mattbta

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I know you've traditionally used the corn - is the switch to e10/15 a hedge on them putting the sniffer on and potentially being out of compliance? I filled with e85: 22.087 gal @ $2.639. Same fuel cost $2.199 exactly two months ago. Also not happy as with the Bosch fuel pump/sensor and...
  14. mattbta

    Well I think a lifter left the chat

    Nice move on the thread chaser.
  15. mattbta

    Intermittent no crank, no start

    If the camshaft position sensor is not an OEM, you may experience this problem. This is what my 2004 did on a shop unknown origin part: I put an OEM one in and back to normal, after firing a massive parts cannon of fuel pump, pressure regulator, and doing the crank/cam correlation relearn...
See more

Forum statistics

Threads
138,042
Posts
1,997,727
Members
102,981
Latest member
Towmaster

Latest posts

Back
Top