Recent content by Keanen55
-
Anyone replaced the factory Bose sub in its plastic box with aftermarket sub and or used an aftermarket amp with the Bose sub?
Yes, the seats have to come out. I went with the MTX box with built-in amp. I believe that they have been discontinued but it upgraded the small 5.25 to a 10". Much better sound for sure!- Keanen55
- Post #4
- Forum: Audio & Electronics
-
Aftermarket Radio Wiring without a diagram for 2013 Denali with Bose
I bought the Phoenix radio and it was all plug and play. I don't have the bose system in my truck so I'm not much help with that unfortunately. Good luck!- Keanen55
- Post #9
- Forum: Audio & Electronics
-
2500 series front end clunk
Open the hood, have your wife step on and hold the brake petal and tap the gas and watch the engine for excessive play. I bet you that you driver's side motor mount is bad. I had the same thing happen to me last year. I changed everything out in the suspension and it was still making that...- Keanen55
- Post #8
- Forum: Street Suspension
-
2500 series front end clunk
Motor mount possibly bad? They tend to go on the driver's side first!- Keanen55
- Post #5
- Forum: Street Suspension
-
Dashboard Lights
Yes, that is what they are supposed to do! I'm sure that they are on when you're driving at night. You can adjust how bright they are by using the smaller knob next to the main light switch to the left. Press the small knob in and twist to adjust brightness. There's nothing wrong with your... -
Full "neon" escalade third brake light
That's odd. I've had 1 for over a year and no problems. Looks great at night! I'm in TX with 100 degree temps! Must be a bad unit! Sorry to hear that you're having issues! -
Programming non dorman keyfobs
I have a 2010 and also did it in my 2007 Yukon as well- Keanen55
- Post #5
- Forum: Audio & Electronics
-
Programming non dorman keyfobs
This how I did mine, but my fobs were OEM- Keanen55
- Post #3
- Forum: Audio & Electronics
-
Aftermarket bluetooth suggestions?
If you're happy with your headunit there are plug and play solutions out there to add bluetooth. I used this adapter in mine for a few year before I decided to fiberglass a tab in my dash. You do have to pull the radio out to plug into the back of it. Do no exposed wires and clean factory...- Keanen55
- Post #36
- Forum: Audio & Electronics
-
Caliper Covers
Looks good, but I'd rather to rattle can mine. Put the $250 towards performance MODs!! -
Frustrating Camber Issues
I'm having the same issues. I'm thinking of going with the control arms to see if they allow for more adjustment! They are almost too cheap compared to some of the others Lowering control arms I have priced...- Keanen55
- Post #21
- Forum: Street Suspension
-
Leveling suggestions
If you just looking to level the truck, they make a spacer that sits on top of the from shocks assembly. I gives the front an extra 1inch or 2 and it's cheap and easy to do. I guess would call that a body lift- Keanen55
- Post #3
- Forum: Street Suspension
-
-
Upgrade to Power Mirrors
Yup, buy used driver and passenger window switches from a truck that had the option (I bought the switches from an totaled Escalade). Plug and play. You can buy new mirrors, those don't matter. Easy swap, Ive done it twice!
