Recent content by ke5gnz
-
K
Escalade Cluster in NNBS!
Ok just wanted to update got it working. What apparently was going on is I had cut the connector of an old cluster and connected the wires to that and being that the board is double sided there must have been some type of connection on the plug side of the board. I removed the piece of circuit... -
K
Escalade Cluster in NNBS!
Just tried in the wife’s truck and same thing so going to check plugs again -
K
Escalade Cluster in NNBS!
No that switch works but is the only one on the Cadillac cluster yet they all work on the GM cluster -
K
Escalade Cluster in NNBS!
That’s how it is wired the only difference is the truck has the yellow wire for back lighting not connected and there is a blue wire on pin 17 on the truck side that is for wait to start if it were a diesel -
K
Escalade Cluster in NNBS!
I made the harness following schematics from GM upfitter and all data -
K
Escalade Cluster in NNBS!
Hello new here I have done this mod a while back and have not been able to use the bottom three buttons on the dic control. I can't see oil life, oil pressure, tire info ect. I have checked the switch and all looks good it functions properly with the gm cluster but not the Cadillac cluster. i...
