Recent content by chilleblanco36

  1. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    I’m about to leave in a few and try the 5 psi you suggested. I have tried a little air in them but didn’t want to raise the rear end.
  2. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    I’m not running any pressure in them. I only do that when I tow. If I put air in them now it will lift the rear of the truck.
  3. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    Here are the pictures of the springs as it sits. Could they be put in upside down? Would that matter?
  4. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    interesting. I think I will look into that. I plan to replace the carpet first. It looks a mess but was like that when I got it. It was lower mileage but the original owner had small kids.
  5. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    I’ll get some pics of the springs at ride height The wheels are hyper black chrome. I will try the bilstein 4600’s and see if that helps. Other than that, the ride is great. I do hate all the plastic rattle when going over bumps, but it did that with stock suspension.
  6. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    Yes it has the shock extenders. In my opinion, I think the springs are bottoming out. The shocks have plenty of travel left.
  7. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    I want to say yes, but I’ll check later today. It’s been a while since I lowered it.
  8. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    I did do the free travel mod and I’ll have to find out which shocks I’m using. Toney NorcalSS set me up with the kit.
  9. chilleblanco36

    Lowered Tahoe takes bumps in rear too hard

    I have a 2/3 drop on my 2010 Tahoe and I’ve never liked how the rear takes bumps. I have the belltech kit and the street shocks and struts that came with it. Should I switch to some new rear shocks? If so, which do you recommend? Any other recommendations will be appreciated.
  10. chilleblanco36

    Oil pressure drop?

    I can’t say if I noticed it being any different before. My truck was in the paint shop for a month and getting it back had me monitoring everything closely and noticed it. It may have been this way for a while. Can’t remember. I’ve been more focused on my C6Z. I’m getting ready for a trip from...
  11. chilleblanco36

    Oil pressure drop?

    So you think I should look into replacing the oil pump ASAP or what? Thoughts?
  12. chilleblanco36

    Oil sending unit size (other than 1 1/16?)

    I know this is a couple of months old, but I just replaced my sensor today. I believe your socket is hitting on the shield sitting right in front of it. I had this same experience an hour ago. Also, I removed the OEM unit with a 12 point 1 1/16” deep socket. I had to use a 6 point to install the...
  13. chilleblanco36

    Oil pressure drop?

    Swapped it out with new sending u it and filter. It did not go over 40 psi on cold start but it did when I rev’d the engine higher. May change the oil again and use a different filter, or maybe just swap the filter
  14. chilleblanco36

    Oil pressure drop?

    Got it out. Video helped a lot. Doesn’t appear to be clogged though. I’ll swap it all anyway
  15. chilleblanco36

    Oil pressure drop?

    I called tonight and they have the standard brand that comes with the filter. Going to attempt to swap it without removing the intake. Just worried I won’t be able to get the filter out.
See more

Forum statistics

Threads
129,203
Posts
1,812,071
Members
92,305
Latest member
DefiantOne

Latest posts

Top