Recent content by Cantrepeat

  1. Cantrepeat

    Fluctuating voltage gage

    I'm under the impression that newer alternator/charging systems actually shut off when the power is not needed. Thus, the gauge will show 12v or lower and when on show a normal 13-14v.
  2. Cantrepeat

    Tahoe RST Brembo brakes upgrade

    Quick pic of the wheels installed.
  3. Cantrepeat

    Premier Vs RST

    I'm not sure on the 2022s but my 2019 RST has the cooled seats. It seems the only real options my RST is missing is the HUD and possibly higher level stereo but I'm not 100% sure on that. My RST also has the 6.2l in it. I just looked at my window sticker, it has the Bose 10 speaker stereo...
  4. Cantrepeat

    Tahoe RST Brembo brakes upgrade

    Looks like my wheels are going to be here about 6 weeks early. I have a question about care of them. Do you ever take your Tahoe through the carwash? I take mine to the carwash about 3 times a week but I'm wondering if it will harm the new forgeline wheels or not.
  5. Cantrepeat

    Power Stop Z36 Front & Rear Rotor & Pad kit $325.07+tax

    Thanks for the update. I ordered the entire kit. I'll install them when my Forgeline wheels get here in a couple of months.
  6. Cantrepeat

    Power Stop Z36 Front & Rear Rotor & Pad kit $325.07+tax

    Did you get these installed yet? I'm thinking about going with a set for my 2019 RST. https://www.jegs.com/i/Power-Stop/419/KC6560-36/10002/-1
  7. Cantrepeat

    2/4 or 2/3 drop for AutoRide LTZ?

    I've had no issues with the Belltech rear springs being too soft. It riders pretty well to be honest and that's after a year on them.
  8. Cantrepeat

    2/4 or 2/3 drop for AutoRide LTZ?

    Yes, adding the 1 inch space keeps it at a 3 inch drop and no need to cut anything. This was on my 2019 so I'm not 100% sure on your 07-13 models and you know the kit you need for them is a different part number...
  9. Cantrepeat

    2/4 or 2/3 drop for AutoRide LTZ?

    Belltech 1019 - 2014-2020 GM SUV 2WD/4WD 2" F/3-4" R Says it's a 2 inch front and 3 or 4 inch rear. I used the spring spacers in the rear and kept it a 3 inch. When I put a tape measure on the front it wasn't a full 2 inches. Closer to 1.75. I'm happy with the way it sits and rides.
  10. Cantrepeat

    Workin at the carwash, yeah!

    Keep those black limousines comin' - said Rose Royce!! I just pay the 30 bucks a month for unlimited carwashes at the local Caliber Carwash.
  11. Cantrepeat

    Dark Ash '22 Tahoe. Thoughts after a few days

    I don't think it's the flywheel, could be. I think it's the throttle by wire programming that's the issue. If you step on the gas there is a noticeable lag before the Tahoe starts to accelerate. Likewise when lifting off the pedal there is lag before the car stops accelerating. It's very...
  12. Cantrepeat

    2/4 or 2/3 drop for AutoRide LTZ?

    I did a beltech 2/3 drop. There is a video on doing the drop on youtube. I think I only found a 4/6 drop so there were things I didn't need to do. For me it was just replacing the knuckles and the rear springs. https://www.summitracing.com/parts/bel-1019 I watched this video and saw that it's...
  13. Cantrepeat

    Tahoe RST Brembo brakes upgrade

    Little necro, I finally threw down on the VX1_Ts and the Michelins!! Same PVD Black Chrome. Gerry said 12 weeks to get them but it's worth the wait!
  14. Cantrepeat

    Putting a 2018 Silverado/Sierra Jump Seat into a 2016 Suburban/Tahoe/Yukon?

    Has anyone made any headway on getting the factory USB and 12v plugs in the AUX seat working? I had to put everything on hold for a while. Wife was diagnosed with ****** cancer and died last June. Just now getting around to this again.
  15. Cantrepeat

    How many miles have your Tahoe put down in the road?

    Bought mine in 07, second owner, and still have it. With the crazy prices old square bodies are getting nowadays, I'll just pass it on to my daughter to sell when she needs some cash.

Forum statistics

Threads
129,225
Posts
1,812,421
Members
92,327
Latest member
Jake 2015 GMC Yuk
Top