Dan Acosta
Full Access Member
- Joined
- Feb 26, 2017
- Posts
- 186
- Reaction score
- 41
I was in the process of converting my interior lights to LEDs. I got them all done, and was changing out the lights on the center console - rear entertainment unit. It was probably the easiest. When I plugged it back in no lights. I dont recall if it lit before the conversion. The LEDs are soldered in correctly (polarity). I have been able to get them to light up once or twice with some wiggling of the harness. I thought perhaps the board somehow was damaged. I bought a replacement from the junk yard and have the same results. Which leads me to think the harness is bad. Has anybody else had this problem - common issues?