Stuck fuel line fitting (350 TBI)

[95escahoe]

One of the fuel line fittings that screws into the TBI unit will not budge, trying to replace the teflon washer on both since the TBI unit is off but don't want to damage it, any ideas?

Sent from my HTC One X using Tapatalk

 

[SunlitComet]

use a flare nut wrench if not doing so already.

 

[95escahoe]

use a flare nut wrench if not doing so already.

Used it, wasn't leaking so let it be

Sent from my HTC One X using Tapatalk

 

[SunlitComet]

good move. only other thing to try maybe is put a snap on flank drive six point socket on it and fasten the tb into a secure vise with out damaging somehow.

 

[95escahoe]

good move. only other thing to try maybe is put a snap on flank drive six point socket on it and fasten the tb into a secure vise with out damaging somehow.

Maybe, if it ever leaks might have to do that, just had a teflon washer for both so figured id throw them both on if it was easy enough, if I ever attempt that ill pick up a spare TBI for parts incase it gets damaged

Sent from my HTC One X using Tapatalk