Rear Bumper Question

[Atreuce]

First - Don't know who's truck I saw this off of. It's someone from TYF. I apologize for this, but I really want my tahoe rear to look like this.

Anyone have part numbers, or ideas where I can get this?

 

[NathanJax]

Just google "Tahoe roll pan"

There's a bunch of sites (and eBay) that sell them

 

[Atreuce]

don't know what i'd do without you nathan.

is there one thats better than the others? i see a bunch of different ones. steel, fiberglass, with box.. blaaah

http://www.andysautosport.com/products/pirana__RS00P.html 80 bux?

 

[NathanJax]

Some people say you want to get steel to weld to your steel fenders, fiberglass will take a bunch of work to get perfect and can warp. That guys isn't welded, it's bolted, so that's another thing you need to look at


If it were mine, I'd do steel and welded in, but bolting would be fine too

 

[Atreuce]

and steel it shall be.

thanks again, nathan.

 

[ccapehartusarmyINF.(ret)]

appearently when you do a roll pan on a tahoe you have to cut off a small part of the frame or it wont fit

 

[Atreuce]

yeah i was reading that... definitely going to let a body shop install it.

 

[skaffy03]

No... You don't need to have it cut.

I bought the street scene urethane roll pan and it fits right up against the frame. Didn't cut it.

 

[jpmire]

Has anyone seen a roll pan on a Tahoe or Yukon that has the towing package? I've wanted to do this for a while now. But I tow a trailer and don't want to lose that ability. Any ideas?

 

[middelgriff1]

can you run a flip up rear lic plate?