E_S
TYF Newbie
My oil pressure gauge died the other day. Now just not moving at all. What's the most common fault, gauge itself or sender? Where's the sender located? '04 Tahoe 5.3 4WD.. 
Oil pressure gauge died - gauge or sender?
- Thread starter E_S
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
electro
Full Access Member
I'm presuming sender is more commonly at fault. Someone else will know better I think.
My sender is currently leaking oil I think from the o-ring seal. Hardly any oil, just enough to keep everything nice and oily..
It's located at the back of the block near the top. More or less under windshield cowling.
---------- Post added at 09:44 PM ---------- Previous post was at 09:43 PM ----------
Require sensor socket with notch to allow wires or be in place at the same time the socket is on there.
Local part source here in Ontario loan a socket.
My sender is currently leaking oil I think from the o-ring seal. Hardly any oil, just enough to keep everything nice and oily..
It's located at the back of the block near the top. More or less under windshield cowling.
---------- Post added at 09:44 PM ---------- Previous post was at 09:43 PM ----------
Require sensor socket with notch to allow wires or be in place at the same time the socket is on there.
Local part source here in Ontario loan a socket.
