New 285/55/22 Nittos

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

02Burgundybeast

Full Access Member
Joined
Aug 9, 2015
Posts
356
Reaction score
124
Location
South GA
Decided to sell my Toyo's and pick up a set of Nitto Terra Grapplers. Already put 1,500 miles on them this past weekend making a road trip and couldn't be happier. I highly recommend them.

CF44CCB0-0741-48E9-A428-C2776095FBAA_zps3prrgdxv.jpg
77772B02-C33F-474C-8D26-8FC7E179FD7E_zpsapofjgmk.jpg
5CF2D9DF-0C37-4B84-A31B-EBF117361B95_zpshelhsahe.jpg
 
OP
OP
02Burgundybeast

02Burgundybeast

Full Access Member
Joined
Aug 9, 2015
Posts
356
Reaction score
124
Location
South GA
2.25" Ready Lift in the front, stock rear w/ firestone bags. I have 1" spacers but I already ran the air lines thru the bottom hole befre I bought that spacers. I need to flip the springs just ahvent done it yet.
 

Tiki

Full Access Member
Joined
Jun 4, 2013
Posts
639
Reaction score
318
Dang that looks good. I'm assuming they rub or you've drastically trimmed to fit?
 
OP
OP
02Burgundybeast

02Burgundybeast

Full Access Member
Joined
Aug 9, 2015
Posts
356
Reaction score
124
Location
South GA
A couple years ago I made a road trip and went through some nasty weather. The pop rivets came loose in the fender and they rubbed on my stock tires. When I replaced the front valance/bumber cap, i went ahead and trimmed the plastics and molded the liner. The only thing I had to do was hammer the pinch weld about a half inch to clear a full lock. The rear hits the shock cover when I flex. I am never off road so that is not a major issue.
 

Forum statistics

Threads
129,271
Posts
1,813,092
Members
92,380
Latest member
Pepper1700
Top