dropmech
Puddle Pirate
Getting ready to put some 22s on and I realized that the stock lug nuts wont work. I need a deep socket nut. What size do I need to be looking at getting? Know where some good deals are on them?
Lug nut size
- Thread starter dropmech
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
WICKEDOWESIX
Full Access Member
- Joined
- Mar 21, 2010
- Posts
- 105
- Reaction score
- 95
The thread size is 14mm x 1.5 thread pitch and your local autoparts store usually carries different style lugs. Good luck!
OP
OP
dropmech
Puddle Pirate
Thanks! I think I found a set in the color I need on ebay for $40 shipped. Just waiting to hear back from the seller then I'll buy.
Modded
That Guy
- Joined
- May 3, 2009
- Posts
- 6,942
- Reaction score
- 107
I have these (including the socket needed for removal) for sale at $63 shipped:http://www.summitracing.com/parts/GOR-26145HT/
They were on my Tahoe for a week so they look brand new (8 of them are brand new because the Tahoe's are only 24 lug).
They were on my Tahoe for a week so they look brand new (8 of them are brand new because the Tahoe's are only 24 lug).
Modded
That Guy
- Joined
- May 3, 2009
- Posts
- 6,942
- Reaction score
- 107
No 03Tahoe that is supposed to be never done, your lugs could come loose while driving if you do that, which equals your wheel/tire continues down the road, while you may end up in a ditch!
OP
OP
dropmech
Puddle Pirate
Modded, thanks, but I went with the ebay sale.
devious1
Full Access Member
how would you determine whether you need 1.5" or 2" lugs?
