Cobra
Full Access Member
I had a a bad speedo and battery guage. So I changed out the stepper motors with the new black ones off Amazon. I adjusted them to marks where previous guages rested.
Will now the only guage working is the oil pressure guage. The speedo guage jumps to 120 after connection, When Tahoe is on the rev guage staggers up slowly in one direction till max out, the other guages show no movement at all. I don't know what the problem is since it was just unsoder and resoder in new motors. Pretty basic process. NOw I may need to buy a new guage cluster if I can not figure this out.
IS there a difference in Soder Conductivity?
Open to suggestions..
Will now the only guage working is the oil pressure guage. The speedo guage jumps to 120 after connection, When Tahoe is on the rev guage staggers up slowly in one direction till max out, the other guages show no movement at all. I don't know what the problem is since it was just unsoder and resoder in new motors. Pretty basic process. NOw I may need to buy a new guage cluster if I can not figure this out.
IS there a difference in Soder Conductivity?
Open to suggestions..
