Bad trans or transfer case?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rockola1971

Full Access Member
Joined
Dec 29, 2016
Posts
2,419
Reaction score
3,075
Location
Indiana (formerly IL)
No wonder it was making all kinds of noise on you. It started spitting its guts up into the pan. I see what looks like needle bearings and even ball bearings laying there.

Key things to remember here when troubleshooting drivetrain noise. When a vehicle is NOT moving forward or reverse physically and there is noise, it aint coming from the differential, Tcase or driveshafts since none of those are moving when a vehicle is not physically moving forward or backward. But there are plenty of things moving in a transmission that are moving during that time (when tranny is in a forward gear or reverse).
 
OP
OP
P

Peeledpeas

TYF Newbie
Joined
Oct 22, 2023
Posts
20
Reaction score
14
So, I am now hip deep in a transmission swap. I am confused on the seal I need to replace for the transfer case filling up with fluid. Is it the back of the trans or the front of the T-case? I can't really see a seal on the output shaft of the transmission. BTW, it's a low mile used transmission, so I want to get all the seals replaced before I put it in. I also did the rear main seal while it was apart, (duh, who wouldn't).
 
OP
OP
P

Peeledpeas

TYF Newbie
Joined
Oct 22, 2023
Posts
20
Reaction score
14
was messing around with the broken trans and found more chunks. These are the biggest so far.
 

Attachments

  • 20240514_174736.jpg
    20240514_174736.jpg
    216.4 KB · Views: 6
OP
OP
P

Peeledpeas

TYF Newbie
Joined
Oct 22, 2023
Posts
20
Reaction score
14
Got the "new" used transmission installed and it's working fine. Took me a while to get it done and it was quite challenging for me with all my arthritis and just working in my garage without a lift. But I'm happy it's finally done. Now I have an old broken transmission sitting around.
 

Forum statistics

Threads
129,856
Posts
1,822,452
Members
93,222
Latest member
dgjtools
Top