33/12.50/20, Levled?

[tahoe035.3]

Does anybody have 33/12.50/20 on a leveled Tahoe, I'm trying to see if 20x10 moto metals with -24 offset will fit with 33's

 

[YukonXL04]

-24 is gonna rub like crazy with 12.5 wide tires... probably want more around a 0 offset.

 

[tahoe035.3]

-24 is gonna rub like crazy with 12.5 wide tires... probably want more around a 0 offset.

Do you think they would work with alot of trimming? I don't mind some rubbing as Long as its not hurting anything or making it impossible to turn and I'm thinking ford keys and a 1.5 inch spacer In the back for leveling

 

[YukonXL04]

Is yours 2WD or 4WD?

 

[tahoe035.3]

Is yours 2WD or 4WD?

2wd, aren't the 2wds just as tall as 4wds except the z71? Also right now I have the stock keys cranked with 285/7017 and I already trimmed some to where they don't rub

 

[YukonXL04]

Was gonna say get spindle instead of keys since your 2wd. Ride better and bigger lift. And get 2in spacers for the rear with 3 inch lift spindles...

 

[tahoe035.3]

Was gonna say get spindle instead of keys since your 2wd. Ride better and bigger lift. And get 2in spacers for the rear with 3 inch lift spindles...

I thought about lift spindles, but they are pretty expensive and I just replaced everything in the front end and I don't feel like tearing it down again

 

[Z-56 Hoe]

They are like $100 more then a level kit.

 

[JayXSP]

If you go with spindles at least you won't have to fight taking the front end apart

 

[tahoe035.3]

Does anyone have a link to lift spindles I can't find them but I remember rough country website use to have them and is there anyway to figure out how much farther the rims and tires are pushed out than the stock