2003 GMC Yukon Denali XL

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Pew5023

TYF Newbie
Joined
May 14, 2023
Posts
3
Reaction score
2
2003 GMC Yukon Denali XL occasionally starts and says stability system disabled. Then the anti theft light comes on as well as the traction control light. It only happens occasionally, and there doesn’t seem to be a more often occurrence with one key as opposed to the other. Any ideas?
IMG_3690.jpeg
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
6,578
Reaction score
8,639
It could be one of your wheel speed sensors is going bad or dirty. If you have a quality bi-directional scanner, it should point you to the source of the trouble codes.
 

tooleyondeck

Full Access Member
Joined
Jan 24, 2022
Posts
254
Reaction score
510
Location
Northwest FL
Mine flashes those warnings intermittently, but the lights don't stay on nor do they throw a scannable code. Could be a speed sensor like Joseph stated or possibly a ride-height sensor or other autoride component. I would start there.
 

S33k3r

Full Access Member
Joined
Aug 14, 2017
Posts
2,266
Reaction score
2,996
Location
Dallas, Texas
Could also be a bad ground, bad positive coming off the alternator, or an alternator dying.

The first ground to check would be the one near the driver's side door. Clean it and reinstall it and see if that helps.
 

Forum statistics

Threads
129,392
Posts
1,815,286
Members
92,577
Latest member
SmithMO
Top