Search results

  1. Lanewvr

    Sticky brakes

    I am leaning that way for the brakes staying on after a hard stop. I'll try the abs. The other issue I'm not sure about. My wife is complaining about it being hard to push at first. I need to go drive it, i need to drive it again.
  2. Lanewvr

    Sticky brakes

    How do i test the check valve?
  3. Lanewvr

    Sticky brakes

    I have no abs light. I do have a booster, so I'll check that line. The left front pads were stuck before, but i cleaned them up and greased real well. The move freely now. I had seen one post about this same problem. Guy never posted what fixed it. But one guy suggested a collapsed brake hose...
  4. Lanewvr

    Sticky brakes

    Nobody?
  5. Lanewvr

    Front brakes locking up!!!!!

    Your killing me. I have almost the same problem. What happen?
  6. Lanewvr

    Sticky brakes

    I have a 03 Yukon Denali, my wife had complaining about the brake pedal since we bought it. I finally got her in a way i could understand last night, after i change the pads and rotors. She says the pedal gets hard(sticking I think hasnt done it to me) when she just starts to push the pedal...
  7. Lanewvr

    New Member with New to me Yukon XL Denali

    Welcome. This is the place to be. We just bought a Yukon Denali a couple weeks ago also.
  8. Lanewvr

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Installed new 3rd brake light, plugs and wires.
  9. Lanewvr

    Just purchased a set of problems

    So here it is. Haven't worked out the gauges yet. Put in new plugs and wires, motor sounds good. Noticed the 3rd brake light was out, so installed this new clear and black one. Questioning the brakes now, nose dives super hard under moderate braking. So thats the next thing. I'll probably...
  10. Lanewvr

    Just purchased a set of problems

    Thanks
  11. Lanewvr

    Just purchased a set of problems

    Thanks guys. Im going try to find a used cluster and send one in to be rebuilt. Its still running well. Used it to haul 2 cars today, worked great. Getting a Bluetooth ob2 scanner on mon. to run codes. But noticed today the rear heat blows cold. Any ideas?
  12. Lanewvr

    Just purchased a set of problems

    I agree it might be a bad cluster still because the temp gauge still dosent work.
  13. Lanewvr

    Just purchased a set of problems

    I took the dash apart, the gauge cluster was loose. No screws in it at all. Jiggled the connector and the lights came on. Put di-electric grease on the connection and put some screws in it. Also noticed the brake lights don't come on everytime I hit the brakes. So guess I'm getting a new...
  14. Lanewvr

    Just purchased a set of problems

    I bled the brakes already. They are better. But thats a good tip. Didn't know you could do that. I'm going to check plugs and wires tonight. Also gauge cluster lights don't work. Temp gauge doesn't work, replaced the temp sensor, still doesn't work. Hellofa day one with the yukon. Update...
  15. Lanewvr

    Just purchased a set of problems

    Well replaced o2 sensor. Disconnected battery to reset computer. Reconnected and battery was dead! Did have ignition on before while i bled the brakes. Jump started it. Still misfires, cel is still on. Haven't driven it yet. But also now, shortly after starting hvac switches to defrost! Super...
  16. Lanewvr

    Just purchased a set of problems

    Well i bought the left side o2 sensor, couldn't afford both sides. The engine light is working, so not sure why that code popped up. Unless its periodic, that could be why it turned off at times. I'll update when i get it changed.
  17. Lanewvr

    Just purchased a set of problems

    Just bought a 03 Yukon Denali with 190k in great shape. Left the dealer filled the tank. Boom now its misfiring, check engine light come on, flashes some, sometimes turns off. Checked codes po 131, po 171, po 300, po 650. The po 300 has me most concerned. Can that be from a faulty o20 sensor? I...
  18. Lanewvr

    Which plant was better?

    Most likely.
  19. Lanewvr

    Which plant was better?

    I was referring to the 2001 to 2006, but its helpful for all years to know. I worked at a GM plant for a few years, till my shift was cut. I know there can be small differences, like one plant may have been using more sealant than another. Or a fixture used may have been slightly different than...
  20. Lanewvr

    Which plant was better?

    So I'm in the market for a Sub, Tahoe, or Yukon. Is there a difference in which plant it made. I noticed there was Janesville, Arlington and Mexico. Is there one to avoid? Particular issues from one plant and not others? Thanks.
  21. Lanewvr

    New from Kc area. In the market.

    Well I read that post the other day. It helped me know some things to look for. So now I'm checking head codes for 706 codes. I was looking for ones give me negotiation opportunities. So problems i can fix. Mechanical problems or cosmetic issues. But now I'm wondering well why is in such bad...
  22. Lanewvr

    New from Kc area. In the market.

    New here. In the market for a NBS for our family car. We live on a dirt road in a rural area. We are looking for a Burb, Yukon or Tahoe in the 5k range. I have found a few fixer uppers. We are now trying to figure out what's better, low 200k in good condition or 150k that needs work. Kinda...

Forum statistics

Threads
129,389
Posts
1,815,256
Members
92,575
Latest member
drewlester77

Latest posts

Top