Search results

  1. 23sonthetahoe

    Brake line removal and install at abs module procedure ?

    No where in there did I mention anything about needing a scan tool to fix the module dont know why you would spin it like I don't know what I'm talking about .
  2. 23sonthetahoe

    Brake line removal and install at abs module procedure ?

    Ya I know about the re solder of broken joints that fix this issue. The dirt bag design of the cover is preventing me from removing it . Thus needing to detach break lines. I'm just trying to figure out if that's worth it or not and the process of removing them. Ya a scan tool once the air gets...
  3. 23sonthetahoe

    Brake line removal and install at abs module procedure ?

    I'm throwing an abs light. Its my abs module from the faulty soldier joints but I can't remove it off the unit to fix. Due to the 4 torx 20 screws not coming off. If I were to pull the lines off so I can repair the unit wondering how to do this the 2 from the master cylinder if the cap is on...
  4. 23sonthetahoe

    2001 Tahoe cargo door open warning light

    Hey, there is a message center light on permanently it says CARGO DOOR ADJAR its a 2001 tahoe. The pink and black wire connected to one of the plugs going into the bcm is for the cargo door ajar light. Could I tap into that wire while it's still connected to the bcm and run a ground to it to...
  5. 23sonthetahoe

    Wondering if spacers with 22s will rub ?

    My wheels are an inch narrower than my last set I just figured out. I bought the wheels used and it has a multi bolt pattern guy had them on a Ford. Maybee that could be why they don't look right on this, doing this just for looks. The offset dosnt look right the edge of the wheel is like 3...
  6. 23sonthetahoe

    Wondering if spacers with 22s will rub ?

    Hey everybody, my boss has a newer bs suv it's an escalade but dosnt really matter what it is. I noticed he either has wheels that are very wide or he has spacers as his stick out like 2 inches out of his fender. With mine right next to it I have the opposite thing going on my wheels go inside...
  7. 23sonthetahoe

    Power steering failure

    Nevermind I just saw on here something about flushing being a return line to bucket ill just do that to bleed.
  8. 23sonthetahoe

    Power steering failure

    Thanks your right I see a hose had popped off . Can I just add more fluid or do I need to do something now I ran it while it was empty ?
  9. 23sonthetahoe

    Power steering failure

    Can I please get some help. No power steering at anytime. Fluid is all gone looks to have been sprayed / sloshed somehow over 1/4 of engine bay. It's extremely cold here right now and it's outside so making it harder to check what might be wrong . I have already driven it to store and back...
  10. 23sonthetahoe

    Inner tie rod/ Steering rack Issues

    Hello, trying to break the nut loose on passenger inner tie rod. Its that big one that requires a large Cresent or pipe wrench. Tie rod is so done hanging by a thread inner and outer. My geometry has been screwed up for a long time keys cranked down. When I try to loosen that big nut i get a...
  11. 23sonthetahoe

    Water pump replaced now there's a noise

    Hows it goin, I did the wp yesterday. As soon as I turned the key apon completion, im hearing a fairly quite squeal that changes pitch randomly. As well, wen I rev it in park the squeal gets a little louder but not by much . Can't here it when truck is moving. Should I hv dumped...
  12. 23sonthetahoe

    Mixed coolants

    Totally good call ! Thanks for everyone's feedback !! I appreciate it ! Prestone slime neon green is what I added in the system and ya good call I went and looked it says comparable with any color.. So left it in going to drain rad , hoses, and what ever is in watetpump when I change the pump...
  13. 23sonthetahoe

    Mixed coolants

    Very cold here freezing would occur quickly.
  14. 23sonthetahoe

    Mixed coolants

    Will a flush get it all out.of the system or do you think ive caused damage its been in there 2 days but trucks only ran for a few minutes ?
  15. 23sonthetahoe

    Mixed coolants

    Hi I did something dumb after truck threw the low coolant light. Pulled over immediately asked the guy at service station who said the coolant i got would work. But I was dumb and put the wrong green coolant in the resevoir it was very close to empty and I topped it off. So fluid wise that would...
  16. 23sonthetahoe

    01 Tahoe no green backup wire by ebrake?

    Hi trying to get my backup cam working all info on this im finding says the light green backup wire is by ebrake behind cover with the plastic nut. Easy right. Well I popped my cover and I literally hv 1 4 wire connector in there all orange wires. All the other spots are there with no other...
  17. 23sonthetahoe

    Won't go into park

    I changed the whole column shifter assembly I got from a wrecker for cheap. Its still doing the exact same thing as it did with the original shifter assembly that had the broken spring. Still drives and reverses but I need to start it in neutral and it won't go into park or 3 2 or 1st. Any help...
  18. 23sonthetahoe

    Won't go into park

    Oh thanks for moving this thread, my bad. *** So it is the little sping right by the gear selector thats broken. Pulled a few pieces (2) of spring out still couldn't get the spring even now that its shorter. Called local dealer parts guy says that I can't replace sring have to replace the...
  19. 23sonthetahoe

    Won't go into park

    I know there is a lot of info On the subject my specific problem is it won't go into park and it won't go into 3rd 2nd or 1st and there is a ton of slop at the shift lever it's not the solonoid linkage ive checked that its all hooked up there's just a ton a slop like almost like there's a bolt...
  20. 23sonthetahoe

    Ok to run my spare on rear for a few days ?

    Hey I have an 01 tahoe 4x4 got a huge bubble in the side wall of a rear tire .My spare tire has a slight difference in diameter to the set im running 1/2 " .Would it be ok to run those two different sizes on the rear for a few days?
  21. 23sonthetahoe

    **Can anyone please help rear brake leaking**

    The bolt is backed right out of the caliper threads the crush washer is hung up from being torqued down. Vice are totally the ways to go for that though it happened another yime but i was in a garage and i was able to take my wheel off makes it way easier. What i cant figure out is why so much...
  22. 23sonthetahoe

    **Can anyone please help rear brake leaking**

    The thing I dont get is pressure and amount of brake fluid coming out once i get that brake line started to back off. As much as the master cylinder holds was on the ground in two attempts of quickly having it undone. Ive had break lines off before they never leaked out all the fluid that quick
  23. 23sonthetahoe

    **Can anyone please help rear brake leaking**

    I guess hey its a brand new caliper under warranty . Last one exploded one of the pistons..
  24. 23sonthetahoe

    **Can anyone please help rear brake leaking**

    Hi I tried to fix my leaking rear brake caliper 01 Tahoe 4x4 . I only put one crush washer on banjo bolt is reason for leak and it must be on the outside of the fitting and im missing the inside one. I know this because now I cant get the banjo bolt even out of the caliper housing at all . The...

Forum statistics

Threads
129,216
Posts
1,812,282
Members
92,317
Latest member
Rcarew907
Top