Search results

  1. Mondo

    Rocker Switches Install

    I kept the onstart unit for the same reason. I can pop it back in and no one will be the wiser.
  2. Mondo

    Making the Yukon Faster

    sadly my tuner the edge evolution cts 2 doesnt have torque or rpm settings. i know if it wasnt for those 2 things i know i could break them loose. But besides breaking them loose i just want to be a little faster
  3. Mondo

    Making the Yukon Faster

    Ive heard alot of people say just gear swap is enough to let you be able to burn rubber. What if i did like 4.20s?
  4. Mondo

    Making the Yukon Faster

    I have 3.73 on mine and am wanting 4.10s but i do 75 pretty much 80% of my driving so i fear my mpg is gonna bet much worse possibly. Thoughts?
  5. Mondo

    Making the Yukon Faster

    Ya not looking to make it a drag truck but want it to be faster off the line for the occasional time i do take it to do drags at my local 1/8th mile drag. Im doing high 10s right now. So forced induction being last on the list due to price. Im thinking trans and headers for right now and maybe a...
  6. Mondo

    Making the Yukon Faster

    Probably had a line lock or tune because stock the rev limiter is set to 1800.
  7. Mondo

    Making the Yukon Faster

    got any details about a cam swap
  8. Mondo

    Making the Yukon Faster

    Im looking into a magnusun supercharger atm. But how much can I gain from just headers? And what about a Cam? And how much would they run. I am ordering the corvette servo tomorrow most likely and do you think a shift kit will help much more after the servo? Sorry im no pro when it comes...
  9. Mondo

    Making the Yukon Faster

    Hey all, Staright to the point i have a yukon xl with a 5.3 vortec and 4L60E trans. I am wanting to make it a little more jumpy. I have the basic k&n cold air intake kit and then Flowmaster exhaust. I also have an edge cts 2 tuner. Even with the tuner i notice a decent amount of power increase...
  10. Mondo

    VIDEO GUIDE 02 Yukon XL LED conversion

    Here is the link again guys
  11. Mondo

    2000-2006 Tahoe/Yukon Lift Kits

    I did research it. And it is called a 2" leveling lift kit. So I assumed it would level and lift. It but in the end it still did its job I am lifting it this weekend so no biggie.
  12. Mondo

    Photos of my 2000 yukon xl after a 2"

    So you used 2" spacers and the keys are all the way down? ? I just put in the rough country kit with their tiny .5 inch spacer and keys are all the way down now riding level so if I put 3 inch spacers id have to have my keys a little over half way. Now I love the smooth ride with keys down...
  13. Mondo

    2000-2006 Tahoe/Yukon Lift Kits

    I must say first, I wish I knew about the 10% discount before. Second I installed the 2inch leveling kit. And must say was not satisfied in the end. I only gained 1.5 inch in the front and the rear stayed the same. It shouldn't be called a leveling Lift kit if it isnt lifting all 4 corners only...
  14. Mondo

    Help with A/C controls LED swap

    Well the grey and black wire in pin A16 the very last one. Gave only 4volts so im assuming that is the illumination power suppy by chance does anyone know the ground?
  15. Mondo

    Pics of Suburbans/XLs with 2" lift?

    ok guys finally got my rough country 2inch leveling lift kit installed. Was not a hard install at all. I got 2 inches in the front but didnt get but 1/4 of an inch on the rear. To make the ride level the torsion keys are pretty much all the way backed out. So as of right now all 4 corners are...
  16. Mondo

    Help with A/C controls LED swap

    Well in that case there was only one other that had power and it was only 4v. I will have to test it by plugging in a multimeter into those 3 pins one at a time and dimming and see which one has a drop in voltage
  17. Mondo

    Help with A/C controls LED swap

    Dude that board is a *****. Same thing happen to me I had 2 working and tried for the 3rd and then I went back to one. Before ruining the board and possibly loosing ac controls in florida = no fun. So I said fuck it im getting a led strip and mounting right across the whole thing. And just...
  18. Mondo

    Help with A/C controls LED swap

    I just checked the harness in the truck with it off just lights on. And i got 4v out of A16 Grey with black line wire 12v out of A12 solid orange wire 12v out of B7 solide grey wire
  19. Mondo

    Help with A/C controls LED swap

    I use a butane soldering iron
  20. Mondo

    Help with A/C controls LED swap

    Could you get me that information somehow cause thats what im about to do. This is the back of my ac controls in the pic the bottom is actually the top when it gets mounted the label is just upside down
  21. Mondo

    Help with A/C controls LED swap

    This is how the circuit leads are lifting now
  22. Mondo

    Help with A/C controls LED swap

    This is my home made led strip wired just like this diagram
  23. Mondo

    Help with A/C controls LED swap

    Ya ive tried a few different ways and now its gotten to the point the circuit leads are lifting from the circuit board. Im about to just throw a led strip in and say fuck it. I even tried making my own led strip with the 5mm bulbs in series with a resistor in front and not even that is lighting...
  24. Mondo

    Help with A/C controls LED swap

    Ya I know thats the pos ive seen and our boards are different i do know mine is in 2 series also but i do not know where positive and negative contacts are.
  25. Mondo

    Help with A/C controls LED swap

    I read it over many times if it is the same one. And our boards are different.

Forum statistics

Threads
129,235
Posts
1,812,613
Members
92,335
Latest member
tim j

Latest posts

Top