Search results

  1. 1

    Re pipe the exhaust crossover for easy transmission fluid filter changes

    If you want to keep the stock exhaust, best bet would be to have some cut out the section under the trans pan and weld in flanges, that way you just unbolt that crossover when needing to change fluid/fliter. Or get a tranny pan that has a drain or modify the OEM and add a drain. Only would...
  2. 1

    P015A- O2 Sensor Delayed Response - Rich to Lean

    Any one else have this code? Mods are in my sig. I have an email into Justin at BBP but wanted to see if any one has had this issue and possible resolution. Just came on this morning, I cleared it and will see if it comes back.
  3. 1

    Y-pipe debauchery

    Makes sense, something to keep in mind for next time.
  4. 1

    Improve Towing

    In addition to distribution of weight, the sway control is critical as well especially if towing at highway speeds for long periods. I wouldnt tow anything over 5000lbs without this type of setup.
  5. 1

    Y-pipe debauchery

    What muffler did you use?
  6. 1

    Y-pipe debauchery

    Final update: Slip joints are terrible, do not use them for exhaust. As soon as I went flange mounting all my problems disappeared. It was well worth spending the extra 200 bucks to get them welded on. Driver side Passenger side After Y going to muffler If anyone goes to LT, deletes...
  7. 1

    What CAI do you own? why?

    This except I use AEM dryflow
  8. 1

    Y-pipe debauchery

    Agreed, luckily I have a second vehicle so I just don't drive it. In the last 3.5 week's I have had my truck for a total of like 4/5 days... Right now it's sitting in the guys garage until next week when they can work on it. Fml, next exhaust I'm going flanges all the way, slip joints suck as...
  9. 1

    Y-pipe debauchery

    Interesting, good idea but I can't do that on a 2014 with a custom exhaust, needs to be "right". If it was 15 years old and I was just patching it up, I would go for it.
  10. 1

    Y-pipe debauchery

    Most of them but I can't get the y-pipe to seal to the headers via the slip fit joint. Leaks like a sieve, so I'm going to v band clamps and welding up the other joints. Either that or I'm just welding up all the joints and calling it a day. I can get the trans pan down without removing...
  11. 1

    Vararam VR-TP-09-11. Tri-power

    Interesting, thats a lot of air flow... be curious as to results .... who wants to be the guinea pig?
  12. 1

    Y-pipe debauchery

    Here is old y-pipe parts, going where they belong, in the garbage... Here is new SS mandrel bent y-pipe, using most of the speed eng y-pipe: Resonator welded in as drone was terrible and way too loud:
  13. 1

    Y-pipe debauchery

    Hope to have an update week after next, to make things easier and less expensive I ordered the speed eng y-pipe(waiting for it to be delivered this week) and they will modify it as needed. The y-pipe didn't fit originally so I went custom route and the shop effed it up. So now I'm at a...
  14. 1

    Choose The Better Wheel!

    375's
  15. 1

    Anybody use this compartment?

    It is where the 4WD switch would go, def useless for storing anything. Be better blocked off and someone could install a switch there for something. ^beat me to it
  16. 1

    Y-pipe debauchery

    I am usually much better about doing research about places before I pull the trigger on services. I was in a rush and had a hectic schedule and didnt do my due diligence. Dropping off the truck monday morning. Also adding a resonator as its too loud with just the magnaflow muffler. Shop...
  17. 1

    Y-pipe debauchery

    Im going with the local performance shop, which I should have went with first. I think all the noise I am hearing is due to the crappy bends in the tube and its creating turbulence under heavy load. I talked with the owner and told him my issues and he said he just had a new camaro come in...
  18. 1

    Y-pipe debauchery

    Yeah thats is what I am thinking, cut my losses here and do something similar. I found a local shop that does custom exhaust with pre mandrel bent pieces and then welds them together. There work is very good from the reviews and the pictures. Muffler back is fine, I mean there isnt much to...
  19. 1

    Y-pipe debauchery

    It didnt fit at all, it wasnt even close. No idea why, i cant imagine they changed much in 2014, the last year of nnbs. Its 3" all the way back, even though the tube is bent on a crush bender, its still bigger than the stock setup. ---------- Post added at 07:31 PM ---------- Previous post...
  20. 1

    Y-pipe debauchery

    They fixed it and it still does the bogging vibration/noise under hard acceleration. I am still waiting for my updated tune from BBP but I dont know that it will fix it. Low RPM heavy load (heavy acceleration) it sounds like hell on the driver side, like its being choked off still somehow...
  21. 1

    Y-pipe debauchery

    I talked to one guy first, he pointed the finger at the other guy. I talk to the other guy, he points the finger at the first..... I expressed my displeasure and told them what was happening, told them what I would do if I were them, without stepping on toes. Before I left they were...
  22. 1

    Y-pipe debauchery

    I was absolutely floored when I got under there to look at it. I knew exactly why the truck was running like crap under anything but light load.
  23. 1

    Get a catch can before any mods.

    Yes that would be normal as most attribute the using of oil to the DOD system/lifters. I am hopeful this is what I see next oil change.
  24. 1

    Y-pipe debauchery

    ha, I'm so pissed, I cant even sleep, WTF. I'm going in tomorrow AM and having a talk with them.
  25. 1

    Y-pipe debauchery

    The exhaust shop I took my truck to thinks this is an acceptable Y merge: SMH It a damn T, needless to say it sounds like crap when accelerating from a stop and bogs down as the driver side exhaust has so much back pressure and can't scavenge the exhaust

Forum statistics

Threads
129,350
Posts
1,814,443
Members
92,493
Latest member
hoops0625

Latest posts

Top