can i bleed the system the old way?
furthest caliper from the master and work my way up?
or do i need to take to the dealer to hook up the gm scan tool?
so one of my brake lines cracked while i was doing 60mph and i had to hit the brakes when the traffic light turned red which i blew right through. luckily i didnt hit another car.
anyways, i am on rockauto and there is a DORMAN 919153 {#22932593} Kit i want to buy.
it has all 9 lines for my...
i bought a used cluster from an 04 denali but the PRDN & the message screen only work. none of the gauges move but i do hear one of the stepper motors ticking.
i am going to replace the motors and hopefully it fixes the issue
please provide the ohm values
how difficult is it to change the encoder motor?
i will check youtube to see if there is a vid.
how do i find out what transfer case i have?
is there some type stamping on the case?
i will set it to 4hi or 4lo and will see if it does it again.
i didn't want to try it because i was afraid something might break and then i get stranded
about 2 years ago i had issues with the 4x4 selector buttons not working.
luckily, on this site i found out it was a cold solder issue and i was able to repair the problem.
i always have it set to 2-hi when i drive
for the past several months when i start it up it randomly sets to auto, or 4...
lol. all suggestions are welcomed
only thing i have done was an oil change and rear brakes
last year i changed the leds on the cluster and were working fine until the beginning of this year they started to flicker and the gauges would work fine then they would stop working. even if i shut off...
so i checked the connections and all is good.
battery hasnt died for 9 days until today
i was driving to work today and the battery died out a block away from my house
i put the jumper pack on the battery, truck started up but as soon as i removed the jumper the engine died out.
tried this a...
so i thought my cluster was the issue but i removed it completely and have been driving like this for more than a week
so this issue just recently happened but has also happened about 3 more times in the past 4 months
i wake up,get ready, go out and start up my 03 tahoe and drive to work...
so i have been having issues with my cluster and sorry for the long post
here is a bit of history on the cluster
the PRNDL backlight was not working so thanks to this great site i reflowed the 7 resistors and got it working
then reading through other posts i found out i can change the LED's...
i slept in my tahoe. took a trip to texas, cali, nevada and back to chicago.
i put down the rear right passenger side seat and cut out a piece of foam the width between the door and seat and the length from the back of the front passenger seat to the rear of the cargo area.
then put down a...
Does the avalanche have the same abs brake system as the 03 tahoe?
my dad is having issues getting several codes
C0241 - EBCM Internal solenoid or control valve circuit
C0245 - PCM indicated requested torque fault
C0251 - EBCM Internal solenoid or control valve circuit
C0246 - EBCM Internal...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.