Search results

  1. S

    [Q] 2 in RC lift + tires

    Is that stock suspension?
  2. S

    [Q] 2 in RC lift + tires

    Off chance do you know what size tires can fit without issue? I.e. 30 inch diameter. Wondering if I can run something like the general AT2 on stock suspension. Those are more towards my price range
  3. S

    [Q] 2 in RC lift + tires

    That could work and probably be cheaper, though I need to contact RC about purchasing just those. Also the Pirelli's may be mainly in European markets from what I can tell. Mainly looking for something with a thicker tire wall than the Cooper H/Ts I've got now. I might be interested in that. I...
  4. S

    [Q] 2 in RC lift + tires

    What I'm trying to do is set up my '00 Yukon for moderate offroading in and around Phoenix. Everything is stock now. Currently looking at this 2 in leveling kit and some pirelli MT/R's. I'm not looking to dump a ton of money as the truck is only worth a couple grand in its present state. That...
  5. S

    help fixing keyless entry

    I replaced the module because the keyless entry just stopped working. I tried programming the '03 fob to the original receiver with no luck, and then replaced the receiver assuming that was shot. At this point though, either I'm doing something wrong or the unit isn't receiving power in the...
  6. S

    help fixing keyless entry

    The truck is actually an SLT, and the original fob was KOBUTIBT and that is what is on the fob from the '03 sierra. And as for receiver, the original one taken out is KOBUT1XR and the part number is 15732806, and that part number is the same as the one I put in (bought it on eBay from someone...
  7. S

    help fixing keyless entry

    The numbers on the back of the fob casing match the original 2000 and the 2003 sierra. I will go to the dealership one of these days and see what they can do because I've only got the one and if they can, it's worth the $50. Thanks for the reply. Sent from my HTC One X using Tapatalk
  8. S

    help fixing keyless entry

    No Its just an SLT. I did see the Denali requires a jumper cable and a couple other things. Would I find the wiring for this bunched up behind the stereo? Sent from my HTC One X using Tapatalk
  9. S

    help fixing keyless entry

    So I just checked the housing on the OBD2 port again and there is no metal contact inside the 8 pin, only 2,4,5,15, and 16. Im assuming that could be an issue. Also, will any piece of copper wire serve as a jumper between the two contacts? I also just got back from pep boys and the battery...
  10. S

    help fixing keyless entry

    Yeah nothing is working... would the battery holder be affecting it? one of the joints is broken in the receiver
  11. S

    help fixing keyless entry

    I just don't get it because the whole thing stopped working with the original equipment and the receiver behind the dash is off ebay but it was pulled working, and the fob is from an 03 sierra but its been in a drawer for 8 years and all of the numbers for the new equipment are the same as what...
  12. S

    help fixing keyless entry

    Yeah the Fob and the receiver don't connect when trying the method of holding unlock, turning on/off/on/off and then holding the buttons on the fob. Is there a different method that could have the two be programmed?
  13. S

    help fixing keyless entry

    Didn't work.. any other tips? Might you know where the line to the main unit runs? maybe something is broken
  14. S

    help fixing keyless entry

    I have a 2000 yukon that has had no keyless entry for the past month. The receiver behind the instrument cluster has just been replaced, the key fob just got a new battery, and all the fuses have been checked inside the block right next to the door jam on the driver's side. Holding the unlock...
  15. S

    First Time Speaker Swap

    Hey everyone, I'm looking to install some new speakers into my 2000 yukon and I have some questions. I was told that the truck came with the factory installed premium sound system, which I think are bose and I'm looking to put some new Pioneer's. I'm wondering if these will work...

Forum statistics

Threads
129,350
Posts
1,814,440
Members
92,493
Latest member
hoops0625

Latest posts

Top