Bosnia0897
TYF Newbie
- Joined
- Mar 8, 2019
- Posts
- 1
- Reaction score
- 0
Do the front tires rub the inner fender liner when you are turning in reverse?
Show off your 2015+ leveled Tahoes and Yukons!
- Thread starter Frogman32
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
DWSmoot
Full Access Member
Last edited:
CMoore711
Full Access Member
- Joined
- Jul 18, 2017
- Posts
- 1,193
- Reaction score
- 936
What'd you do to gain the clearance? I have a minimal amount of rubbing in this exact spot and need to do something about it.
I was considering picking these up and seeing if I could make them work on my Yukon.
http://zoneoffroad.com/blog/zone-new-product-announcement-135-gm1500-fender-trim-plates/
DWSmoot
Full Access Member
Pulled the liner back and cut/bend the bottom metal back with metal wheel. Just takes some time. Do some research - Norcal fender tuck, probably wont find video on Tahoe but several on trucks to give you an idea.
After making cuts with metal wheel, bend/beat back the metal with a mallet.
Last edited:
Antonio l Toon
TYF Newbie
- Joined
- Apr 9, 2019
- Posts
- 1
- Reaction score
- 0
what kind of lift is on your suburban?
shay howell
TYF Newbie
- Joined
- Apr 16, 2019
- Posts
- 22
- Reaction score
- 9
Did you do anything to the rear
shay howell
TYF Newbie
- Joined
- Apr 16, 2019
- Posts
- 22
- Reaction score
- 9
what size level did you use
shay howell
TYF Newbie
- Joined
- Apr 16, 2019
- Posts
- 22
- Reaction score
- 9
Stock rims 2 in front level 285/60/20 ridge grapplers
shay howell
TYF Newbie
- Joined
- Apr 16, 2019
- Posts
- 22
- Reaction score
- 9
Should I l leave or do the 2.5 and 1 on back?
DWSmoot
Full Access Member
What are measurements front to back? Is there any rake?
