Recent content by Larry W

  1. L

    MP USMC Vehicle build

    Hi Team. I have had a few projects come up taking my eye off the ball of this project. Time to get back on it. So I picked up another Tahoe from Arizona for a friend. He decided he didn't want it so i have a third Tahoes. I checked the build codes and realized it has 4.10 gears. So Iam thinking...
  2. L

    MP USMC Vehicle build

    added pic on the RC D ring lower bracket that goes in the frame. had to cut out the lower corner of the RC mount to clear when installed as i had to mount them upside down so they would stick up instead of down to line up with the opening as the 3 inch body lift raised the hook hole 3 inches...
  3. L

    MP USMC Vehicle build

  4. L

    MP USMC Vehicle build

    So i took a week now off back at it. I finished the RC front 3,5 susp lift install. i did the back last week. It was easy they provide upper control arms and new loaded struts. I changed the lower ball joints while in there. The provided spacers to lower the front diff was not a big deal and...
  5. L

    Power step question. 07-14 vs 15-20

    Pete i missed your post. Your right two different part numbers for AMP steps. I see RC uses magnetic stick Ons to trigger operation so i figure it's a bit independent from body control etc. so they might work. Also, i slid under my wife's 2020 Tahoe and from what i see the rockers look the same...
  6. L

    Power step question. 07-14 vs 15-20

    I didn't here from anyone So i ordered the Rough Country 2015-2020 power steps. Ill keep you all posted as how i make them fit a 2007-2014 Tahoe. stay posted.
  7. L

    Power step question. 07-14 vs 15-20

    I wanted to put power steps on my 2013 tahoe. Rough country makes them for 2015-2020. I looked at my wifes 2020 and my 2013 and the rockers look the same. Has anyone tryed using the one for the 15-20 yr on the 07-14 model. I realize AMP makes ones for the older model but there 600 more then...
  8. L

    MP USMC Vehicle build

  9. L

    MP USMC Vehicle build

    I was a bit busy today. I worked on the back tire carrier. Next started by reinstalling the bumper reinforcement then the bumper cover. I carefully transferred and drilled the holes to allow the carrier to be bolted trough the cover. Next had to cut the three bolts off the carrier that hold...
  10. L

    MP USMC Vehicle build

    Michael (Pete the pug) I like you we think alike. Maybe once it gets close well look at a ring mount and belt fed on the roof. Tomorrow i plan on getting the rear bumper close and moving on to the front. My brains working on a concealed winch behind the bumper and some D rings for tie downs...
  11. L

    MP USMC Vehicle build

    Update Today i got a little time to work on the back bumper, Youll notice the welded performance bumper mounting brackets that are to allow the bumper placement with the 3 inch body lift, I welded them on rather then bolt them, I really like the performance body lift the hardware is robust...
  12. L

    MP USMC Vehicle build

    Hi All Thanks for the welcome. Today i worked on the rear tire mount. I started with a hummer rear tire mount off ebay 179 very cost effective. I used a 1.5 x 5 inch c hannel x 48 inches to mount it to the tahoe. I will add left and right fasteners to the reinforcement to hold it better...
  13. L

    MP USMC Vehicle build

    Hi Team. I have always collected and liked military vehicles. Most of which are not fun to drive daily. So i picked up a 2013 police vehicle out of florida with abot 40k on it and in the process of making look like a USMC type police veh. I will post some pics and ex[lain how i did stuff as i...
See more

Forum statistics

Threads
129,443
Posts
1,816,111
Members
92,660
Latest member
Ayden with 2011 y

Latest posts

Top